I am getting the same Errors lsusb finds it Bus 001 Device 002: ID 04da:2372 Panasonic (Matsushita) Lumix DMC-FZ10 Camera Actually it's a FZ50 but I think that's irrelevant here /proc/scsi/scsi doesn't dmesg says [63009.432194] usb 1-1: new full speed USB device using uhci_hcd and address 2 [63009.596067] usb 1-1: configuration #1 chosen from 1 choice [63009.599090] scsi5 : SCSI emulation for USB Mass Storage devices [63009.599533] usb-storage: device found at 2 [63009.599536] usb-storage: waiting for device to settle before scanning and nothing more
gphoto2 -L says as before but nothing about already in use yada yada yada 0.907905 gphoto2-port-usb(1): Looking for USB device (vendor 0x4da, product 0x2372)... found. 0.907977 gphoto2-port-usb(1): USB device (vendor 0x4da, product 0x2372) is a mass storage device, and might not function with gphoto2. Reference: http://www.linux-usb.org/USB-guide/x498.html 0.908016 gphoto2-port-usb(2): inep to look for is 82 0.908022 gphoto2-port-usb(1): Detected defaults: config 1, interface 0, altsetting 0, inep 82, outep 01, intep ffffffff, class 08, subclass 06 0.908032 gphoto2-camera(2): Loading '/usr/lib/libgphoto2/2.4.0/ptp2'... 0.908794 gphoto2-port(2): Opening USB port... 0.908810 libusb(2): gp_port_usb_open() 0.908882 libusb(2): claiming interface 0 0.908923 ptp2(2): maxpacketsize 64 0.908967 gphoto2-port(2): Setting timeout to 8000 millisecond(s)... 0.908980 ptp(2): PTP: Opening session 0.908992 gphoto2-port(2): Writing 16=0x10 byte(s) to port... 0.909002 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows: 0000 10 00 00 00 01 00 02 10-00 00 00 00 01 00 00 00 ................ 8.910620 ptp2/usb_sendreq(2): request code 0x1002 sending req result -35 8.921908 ptp2/camera_init(0): ptp_opensession returns 2ff 8.921920 ptp2/device_reset_request(2): sending reset 8.921937 gphoto2-port(2): Writing message (request=0x66 value=0x0 index=0x0 size=0=0x0)... 8.921962 gphoto2-port(3): No hexdump (NULL buffer) 8.923615 ptp(2): PTP: Opening session 8.923635 gphoto2-port(2): Writing 16=0x10 byte(s) to port... 8.923647 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows: 0000 10 00 00 00 01 00 02 10-00 00 00 00 01 00 00 00 ................ 16.925865 ptp2/usb_sendreq(2): request code 0x1002 sending req result -35 16.925894 ptp2/camera_init(0): ptp_opensession returns 2ff 16.925903 ptp2/device_reset_request(2): sending reset 16.925910 gphoto2-port(2): Writing message (request=0x66 value=0x0 index=0x0 size=0=0x0)... 16.925933 gphoto2-port(3): No hexdump (NULL buffer) 16.927861 ptp(2): PTP: Opening session 16.927876 gphoto2-port(2): Writing 16=0x10 byte(s) to port... 16.927908 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows: 0000 10 00 00 00 01 00 02 10-00 00 00 00 01 00 00 00 ................ 24.932117 ptp2/usb_sendreq(2): request code 0x1002 sending req result -35 24.932144 ptp2/camera_init(0): ptp_opensession returns 2ff 24.932153 ptp2/device_reset_request(2): sending reset 24.932160 gphoto2-port(2): Writing message (request=0x66 value=0x0 index=0x0 size=0=0x0)... 24.932184 gphoto2-port(3): No hexdump (NULL buffer) 24.934141 context(0): PTP I/O error *** Error *** PTP I/O error 24.934174 gphoto2-port(2): Closing port... 24.935167 context(0): An error occurred in the io-library ('Unspecified error'): No error description available *** Error *** An error occurred in the io-library ('Unspecified error'): No error description available *** Error (-1: 'Unspecified error') *** This does HOT happen my daughters Kodak after doing the latest updates Bus 004 Device 003: ID 040a:05bf Kodak Co. There is no Popup The Camera device just appears on the Desktop as camera://[EMAIL PROTECTED]:004,005] I guess this is supposed to be the new behaviour for cameras -- hardy digikam Olympus failed to connect https://bugs.launchpad.net/bugs/213658 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
