Okay well near as I can tell my original directions were accurate:
`sudo get-edid > edid.dat'
This is what I get on my system:
[EMAIL PROTECTED]:/tmp$ sudo get-edid > edid.dat
get-edid: get-edid version 1.4.1
Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful
VBE version 200
VBE string at 0x11110 "ATI R350"
VBE/DDC service about to be called
Report DDC capabilities
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful
Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination supports DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer
Reading next EDID block
VBE/DDC service about to be called
Read EDID
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call successful
[EMAIL PROTECTED]:/tmp$ xxd edid.dat
0000000: 00ff ffff ffff ff00 09d1 da76 1d1e 0000 ...........v....
0000010: 2511 0103 6c34 2178 ea5a d5a7 564b 9b24 %...l4!x.Z..VK.$
0000020: 1350 54bd ef80 714f 8190 8180 818c a940 .PT...qO.......@
0000030: b300 0101 0101 283c 80a0 70b0 2340 3020 ......(<[EMAIL PROTECTED]
0000040: 3600 0744 2100 001e d509 80a0 205e 6310 6..D!....... ^c.
0000050: 1060 5208 782d 1100 001a 0000 00fd 0038 .`R.x-.........8
0000060: 4c1e 5311 000a 2020 2020 2020 0000 00fc L.S... ....
0000070: 0042 656e 5120 3234 3157 0a20 2020 0065 .BenQ 241W. .e
Valid EDID always starts with those first few bytes 0x00, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0x00, if that's any help. If your monitor is
putting out something other than that, then maybe we're just screwed
here...
--
[rv200] initial mode is 1280x768 instead of preferred 1280x1024
https://bugs.launchpad.net/bugs/150709
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
