'sudo modprobe sata_nv' returns the shell prompt without any messages,& the problem is not fixed.the output of lspci,dmesg & lsmod from hardy live cd is provided below. [EMAIL PROTECTED]:/$ lspci 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6100 nForce 430 (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [EMAIL PROTECTED]:/$ dmesg [ 0.000000] Linux version 2.6.24-16-generic ([EMAIL PROTECTED]) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001bfc0000 (usable) [ 0.000000] BIOS-e820: 000000001bfc0000 - 000000001bfce000 (ACPI data) [ 0.000000] BIOS-e820: 000000001bfce000 - 000000001bff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001bff0000 - 000000001c000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 114624) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FB9F0 checksum 0 [ 0.000000] ACPI: RSDP 000FB9F0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 1BFC0000, 003C (r1 A_M_I_ OEMRSDT 11000624 MSFT 97) [ 0.000000] ACPI: FACP 1BFC0200, 0084 (r2 A_M_I_ OEMFACP 11000624 MSFT 97) [ 0.000000] ACPI: DSDT 1BFC0440, 4FAB (r1 A0557 A0557000 0 INTL 2002026) [ 0.000000] ACPI: FACS 1BFCE000, 0040 [ 0.000000] ACPI: APIC 1BFC0390, 0070 (r1 A_M_I_ OEMAPIC 11000624 MSFT 97) [ 0.000000] ACPI: MCFG 1BFC0400, 003C (r1 A_M_I_ OEMMCFG 11000624 MSFT 97) [ 0.000000] ACPI: OEMB 1BFCE040, 0060 (r1 A_M_I_ AMI_OEM 11000624 MSFT 97) [ 0.000000] ACPI: HPET 1BFC53F0, 0038 (r1 A_M_I_ OEMHPET0 11000624 MSFT 97) [ 0.000000] ACPI: SSDT 1BFC5430, 00F4 (r1 A_M_I_ POWERNOW 1 AMD 1) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] CPU has 1 num_cores [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000001bfc0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 114624) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000001bfc0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 114624 [ 0.000000] On node 0 totalpages: 114527 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1207 pages reserved [ 0.000000] DMA zone: 2736 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1511 pages used for memmap [ 0.000000] DMA32 zone: 109017 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000) [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 111753 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 41.038071] time.c: Detected 2009.111 MHz processor. [ 41.041555] Console: colour VGA+ 80x25 [ 41.041558] console [tty0] enabled [ 41.041575] Checking aperture... [ 41.041577] CPU 0: aperture @ 831e000000 size 32 MB [ 41.041579] Aperture too small (32 MB) [ 41.047466] No AGP bridge found [ 41.052616] Memory: 438688k/458496k available (2466k kernel code, 19420k reserved, 1309k data, 316k init) [ 41.052655] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 41.131930] Calibrating delay using timer specific routine.. 4022.10 BogoMIPS (lpj=8044209) [ 41.131966] Security Framework initialized [ 41.131973] SELinux: Disabled at boot. [ 41.131988] AppArmor: AppArmor initialized [ 41.131992] Failure registering capabilities with primary security module. [ 41.132048] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 41.132465] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 41.132661] Mount-cache hash table entries: 256 [ 41.132811] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 41.132813] CPU: L2 Cache: 512K (64 bytes/line) [ 41.132816] CPU 0/0 -> Node 0 [ 41.132844] SMP alternatives: switching to UP code [ 41.133536] Early unpacking initramfs... done [ 41.459054] ACPI: Core revision 20070126 [ 41.459111] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 41.502250] Using local APIC timer interrupts. [ 41.551961] APIC timer calibration result 12556942 [ 41.551963] Detected 12.556 MHz APIC timer. [ 41.552012] Brought up 1 CPUs [ 41.552110] CPU0 attaching sched-domain: [ 41.552112] domain 0: span 01 [ 41.552114] groups: 01 [ 41.552269] net_namespace: 120 bytes [ 41.552680] Time: 4:04:43 Date: 08/31/08 [ 41.552712] NET: Registered protocol family 16 [ 41.552878] ACPI: bus type pci registered [ 41.552945] PCI: Using configuration type 1 [ 41.556381] ACPI: EC: Look up EC in DSDT [ 41.561840] ACPI: Interpreter enabled [ 41.561843] ACPI: (supports S0 S1 S3 S4 S5) [ 41.561858] ACPI: Using IOAPIC for interrupt routing [ 41.571884] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 41.572409] PCI: Transparent bridge - 0000:00:04.0 [ 41.572577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 41.572786] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 41.572907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 41.573005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 41.573103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 41.580336] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 41.580557] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 41.580775] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 41.580993] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 41.581211] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 41.581428] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 41.581645] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 41.581862] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. [ 41.582080] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11 [ 41.582297] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 [ 41.582514] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 [ 41.582732] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 41.582953] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. [ 41.583172] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *11 [ 41.583396] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 41.583618] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 41.583836] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *0, disabled. [ 41.584062] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [ 41.584322] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 41.584430] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 6E, should be 61 [20070126] [ 41.584437] Linux Plug and Play Support v0.97 (c) Adam Belay [ 41.584464] pnp: PnP ACPI init [ 41.584472] ACPI: bus type pnp registered [ 41.591060] pnp: PnP ACPI: found 16 devices [ 41.591063] ACPI: ACPI bus type pnp unregistered [ 41.591276] PCI: Using ACPI for IRQ routing [ 41.591280] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 41.599947] NET: Registered protocol family 8 [ 41.599949] NET: Registered protocol family 20 [ 41.600019] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 41.600023] hpet0: 3 32-bit timers, 25000000 Hz [ 41.601079] AppArmor: AppArmor Filesystem Enabled [ 41.603901] Time: tsc clocksource has been installed. [ 41.603911] Switched to high resolution mode on CPU 0 [ 41.611893] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 41.611895] system 00:07: ioport range 0x800-0x80f has been reserved [ 41.611897] system 00:07: ioport range 0x500-0x57f has been reserved [ 41.611900] system 00:07: ioport range 0x580-0x5ff has been reserved [ 41.611902] system 00:07: ioport range 0x800-0x87f could not be reserved [ 41.611905] system 00:07: ioport range 0x880-0x8ff has been reserved [ 41.611907] system 00:07: ioport range 0xd00-0xd7f has been reserved [ 41.611909] system 00:07: ioport range 0xd80-0xdff has been reserved [ 41.611912] system 00:07: ioport range 0x2000-0x207f has been reserved [ 41.611914] system 00:07: ioport range 0x2080-0x20ff has been reserved [ 41.611917] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 41.611920] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved [ 41.611922] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved [ 41.611925] system 00:07: iomem range 0xffb80000-0xffffffff could not be reserved [ 41.611927] system 00:07: iomem range 0xff300000-0xff3fffff has been reserved [ 41.611934] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 41.611937] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved [ 41.611939] system 00:09: iomem range 0x1c000000-0x1fffffff has been reserved [ 41.611945] system 00:0c: ioport range 0x230-0x23f has been reserved [ 41.611947] system 00:0c: ioport range 0x290-0x29f has been reserved [ 41.611949] system 00:0c: ioport range 0xa00-0xa0f has been reserved [ 41.611952] system 00:0c: ioport range 0xa10-0xa1f has been reserved [ 41.611958] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved [ 41.611964] system 00:0f: iomem range 0x0-0x9ffff could not be reserved [ 41.611966] system 00:0f: iomem range 0xc0000-0xcffff has been reserved [ 41.611968] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved [ 41.611971] system 00:0f: iomem range 0x100000-0x1bffffff could not be reserved [ 41.611973] system 00:0f: iomem range 0xff780000-0xffffffff could not be reserved [ 41.612309] PCI: Bridge: 0000:00:04.0 [ 41.612310] IO window: disabled. [ 41.612313] MEM window: disabled. [ 41.612315] PREFETCH window: disabled. [ 41.612317] PCI: Bridge: 0000:00:09.0 [ 41.612319] IO window: disabled. [ 41.612320] MEM window: disabled. [ 41.612322] PREFETCH window: disabled. [ 41.612324] PCI: Bridge: 0000:00:0b.0 [ 41.612325] IO window: disabled. [ 41.612327] MEM window: disabled. [ 41.612328] PREFETCH window: disabled. [ 41.612330] PCI: Bridge: 0000:00:0c.0 [ 41.612331] IO window: disabled. [ 41.612333] MEM window: disabled. [ 41.612334] PREFETCH window: disabled. [ 41.612344] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 41.612354] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 41.612359] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 41.612365] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 41.612410] NET: Registered protocol family 2 [ 41.647893] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 41.648099] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 41.648270] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 41.648444] TCP: Hash tables configured (established 16384 bind 16384) [ 41.648446] TCP reno registered [ 41.659939] checking if image is initramfs... it is [ 42.292433] Freeing initrd memory: 8171k freed [ 42.299523] audit: initializing netlink socket (disabled) [ 42.299536] audit(1220155483.224:1): initialized [ 42.301307] VFS: Disk quotas dquot_6.5.1 [ 42.301383] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 42.301507] io scheduler noop registered [ 42.301510] io scheduler anticipatory registered [ 42.301511] io scheduler deadline registered [ 42.301605] io scheduler cfq registered (default) [ 42.826384] Boot video device is 0000:00:0d.0 [ 42.826535] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 42.826554] assign_interrupt_mode Found MSI capability [ 42.826571] Allocate Port Service[0000:00:09.0:pcie00] [ 42.826623] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 42.826642] assign_interrupt_mode Found MSI capability [ 42.826655] Allocate Port Service[0000:00:0b.0:pcie00] [ 42.826708] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 42.826726] assign_interrupt_mode Found MSI capability [ 42.826739] Allocate Port Service[0000:00:0c.0:pcie00] [ 42.851130] Real Time Clock Driver v1.12ac [ 42.851332] hpet_resources: 0xfed00000 is busy [ 42.851365] Linux agpgart interface v0.102 [ 42.851367] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 42.851491] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 42.852028] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 42.852633] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 42.852694] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 42.852775] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 42.853113] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 42.853117] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 42.858400] mice: PS/2 mouse device common for all mice [ 42.858435] cpuidle: using governor ladder [ 42.858437] cpuidle: using governor menu [ 42.858583] NET: Registered protocol family 1 [ 42.858637] registered taskstats version 1 [ 42.858746] Magic number: 4:277:61 [ 42.858899] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 42.858902] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 42.858904] EDD information not available. [ 42.858911] Freeing unused kernel memory: 316k freed [ 42.886137] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 44.053361] fuse init (API version 7.9) [ 44.073429] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 44.711940] usbcore: registered new interface driver usbfs [ 44.711964] usbcore: registered new interface driver hub [ 44.720218] usbcore: registered new device driver usb [ 44.733656] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 44.734063] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 44.734074] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 44.734193] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 44.734200] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 44.734418] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 44.734439] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdffff000 [ 44.766137] SCSI subsystem initialized [ 44.784064] libata version 3.00 loaded. [ 44.789666] usb usb1: configuration #1 chosen from 1 choice [ 44.789693] hub 1-0:1.0: USB hub found [ 44.789701] hub 1-0:1.0: 10 ports detected [ 44.891941] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 44.891954] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 44.892073] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 44.892080] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 44.892133] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 44.892163] ehci_hcd 0000:00:02.1: debug port 1 [ 44.892167] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 44.892178] ehci_hcd 0000:00:02.1: irq 22, io mem 0xdfffec00 [ 44.903328] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 44.903453] usb usb2: configuration #1 chosen from 1 choice [ 44.903476] hub 2-0:1.0: USB hub found [ 44.903484] hub 2-0:1.0: 10 ports detected [ 44.939382] Floppy drive(s): fd0 is 1.44M [ 44.960796] FDC 0 is a post-1991 82077 [ 45.007386] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 45.007760] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 [ 45.007771] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 45.007777] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 45.526924] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:1a:92:59:eb:28 [ 45.526930] forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 45.529474] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 45.537042] pata_amd 0000:00:06.0: version 0.3.10 [ 45.537096] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 45.537501] scsi0 : pata_amd [ 45.538210] scsi1 : pata_amd [ 45.539020] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 45.539023] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 45.594367] usb 1-1: new full speed USB device using ohci_hcd and address 2 [ 45.774108] usb 1-1: device descriptor read/64, error -62 [ 46.061711] usb 1-1: device descriptor read/64, error -62 [ 46.341321] usb 1-1: new full speed USB device using ohci_hcd and address 3 [ 46.521070] usb 1-1: device descriptor read/64, error -62 [ 46.804676] usb 1-1: device descriptor read/64, error -62 [ 47.084287] usb 1-1: new full speed USB device using ohci_hcd and address 4 [ 47.491718] usb 1-1: device not accepting address 4, error -62 [ 47.667484] usb 1-1: new full speed USB device using ohci_hcd and address 5 [ 48.074909] usb 1-1: device not accepting address 5, error -62 [ 48.745978] usb 1-1: new full speed USB device using ohci_hcd and address 6 [ 49.014973] usb 1-1: configuration #1 chosen from 1 choice [ 50.727227] ata1: port is slow to respond, please be patient (Status 0x80) [ 55.536544] ata1: SRST failed (errno=-16) [ 55.876343] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL01, max UDMA/66 [ 55.876353] ata1.01: limited to UDMA/33 due to 40-wire cable [ 56.048038] ata1.01: configured for UDMA/33 [ 56.048067] ata2: port disabled. ignoring. [ 56.052593] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-H42N RL01 PQ: 0 ANSI: 5 [ 56.060059] Driver 'sr' needs updating - please use bus_type methods [ 56.064697] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 56.064702] Uniform CD-ROM driver Revision: 3.20 [ 56.064756] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 56.069034] sr 0:0:1:0: Attached scsi generic sg0 type 5 [ 58.337177] end_request: I/O error, dev fd0, sector 0 [ 70.492590] end_request: I/O error, dev fd0, sector 0 [ 70.492595] Buffer I/O error on device fd0, logical block 0 [ 82.643304] end_request: I/O error, dev fd0, sector 0 [ 82.643307] Buffer I/O error on device fd0, logical block 0 [ 95.801292] end_request: I/O error, dev fd0, sector 0 [ 107.952226] end_request: I/O error, dev fd0, sector 0 [ 107.952232] Buffer I/O error on device fd0, logical block 0 [ 120.099538] end_request: I/O error, dev fd0, sector 0 [ 120.099541] Buffer I/O error on device fd0, logical block 0 [ 123.382004] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 123.424284] ISO 9660 Extensions: RRIP_1991A [ 123.697487] Registering unionfs 1.4 [ 123.697491] unionfs: debugging is not enabled [ 123.707306] loop: module loaded [ 123.980977] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 181.117079] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 181.201607] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 182.475844] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 182.624784] input: Power Button (FF) as /devices/virtual/input/input3 [ 182.639988] ACPI: Power Button (FF) [PWRF] [ 182.640090] input: Power Button (CM) as /devices/virtual/input/input4 [ 182.655963] ACPI: Power Button (CM) [PWRB] [ 182.708851] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600 [ 182.708870] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700 [ 183.025524] parport_pc 00:06: reported by Plug and Play ACPI [ 183.025570] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 183.292729] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 183.475109] cdc_acm 1-1:1.0: ttyACM0: USB ACM device [ 183.479723] usbcore: registered new interface driver cdc_acm [ 183.479730] /build/buildd/linux-2.6.24/drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters [ 183.895719] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 [ 183.895732] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [LAZA] -> GSI 20 (level, low) -> IRQ 20 [ 183.895893] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 187.386478] ip_tables: (C) 2000-2006 Netfilter Core Team [ 188.971720] No dock devices found. [ 190.503201] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00) [ 190.503238] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xc [ 190.503241] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xe [ 190.503243] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 194.724416] lp0: using parport0 (interrupt-driven). [ 194.819291] ppdev: user-space parallel port driver [ 199.296901] Marking TSC unstable due to cpufreq changes [ 199.300775] Time: hpet clocksource has been installed. [ 199.578410] Clocksource tsc unstable (delta = -250012050 ns) [ 200.919557] eth0: no link during initialization. [ 201.140316] Bluetooth: Core ver 2.11 [ 201.148835] NET: Registered protocol family 31 [ 201.148840] Bluetooth: HCI device and connection manager initialized [ 201.148844] Bluetooth: HCI socket layer initialized [ 201.377038] Bluetooth: L2CAP ver 2.9 [ 201.377042] Bluetooth: L2CAP socket layer initialized [ 201.535721] Bluetooth: RFCOMM socket layer initialized [ 201.535738] Bluetooth: RFCOMM TTY layer initialized [ 201.535740] Bluetooth: RFCOMM ver 1.8 [ 214.102879] NET: Registered protocol family 10 [ 214.103433] lo: Disabled Privacy Extensions [ 214.104086] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 895.618556] PPP generic driver version 2.4.2 [ 903.054921] usb 1-1: USB disconnect, address 6 [ 903.405135] usb 1-1: new full speed USB device using ohci_hcd and address 7 [ 903.539752] usb 1-1: configuration #1 chosen from 1 choice [ 903.541229] cdc_acm 1-1:1.0: ttyACM0: USB ACM device [ 974.482359] PPP BSD Compression module registered [ 974.529666] PPP Deflate Compression module registered [ 1350.733696] end_request: I/O error, dev fd0, sector 0 [ 1356.809246] end_request: I/O error, dev fd0, sector 0 [ 1356.824400] program gparted is using a deprecated SCSI ioctl, please convert it to SG_IO [ 1362.902902] end_request: I/O error, dev fd0, sector 0 [ 1368.976765] end_request: I/O error, dev fd0, sector 0 [ 1375.056544] end_request: I/O error, dev fd0, sector 0 [ 1375.056553] Buffer I/O error on device fd0, logical block 0 [ 1381.132021] end_request: I/O error, dev fd0, sector 0 [ 1381.132029] Buffer I/O error on device fd0, logical block 0 [EMAIL PROTECTED]:/$ lsmod Module Size Used by sata_nv 31624 0 ppp_deflate 7808 0 zlib_deflate 23192 1 ppp_deflate bsd_comp 7424 0 ppp_async 14592 1 crc_ccitt 3584 1 ppp_async ppp_generic 33568 7 ppp_deflate,bsd_comp,ppp_async slhc 8192 1 ppp_generic ipv6 311720 12 rfcomm 47392 2 l2cap 28800 13 rfcomm bluetooth 67748 4 rfcomm,l2cap ppdev 11400 0 lp 14916 0 powernow_k8 16608 0 cpufreq_userspace 6180 0 cpufreq_stats 8416 0 cpufreq_powersave 3200 0 cpufreq_ondemand 11152 1 freq_table 6464 3 powernow_k8,cpufreq_stats,cpufreq_ondemand cpufreq_conservative 10632 0 video 23444 0 output 5632 1 video sbs 17808 0 sbshc 8960 1 sbs container 6656 0 dock 12960 0 ac 8328 0 iptable_filter 4608 0 ip_tables 24104 1 iptable_filter x_tables 23560 1 ip_tables snd_hda_intel 440408 3 snd_pcm_oss 47648 0 snd_mixer_oss 20224 1 snd_pcm_oss snd_pcm 92168 2 snd_hda_intel,snd_pcm_oss snd_page_alloc 13200 2 snd_hda_intel,snd_pcm snd_hwdep 12552 1 snd_hda_intel snd_seq_dummy 5764 0 cdc_acm 19488 3 snd_seq_oss 38912 0 snd_seq_midi 10688 0 snd_rawmidi 29856 1 snd_seq_midi snd_seq_midi_event 10112 2 snd_seq_oss,snd_seq_midi snd_seq 63232 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 27912 2 snd_pcm,snd_seq snd_seq_device 10644 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 70856 17 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device psmouse 46236 0 parport_pc 41128 1 i2c_nforce2 8704 0 evdev 14976 3 button 10912 0 serio_raw 9092 0 shpchp 38172 0 parport 44300 3 ppdev,lp,parport_pc k8temp 7680 0 pcspkr 4992 0 pci_hotplug 34608 1 shpchp i2c_core 28544 1 i2c_nforce2 soundcore 10400 1 snd battery 16776 0 squashfs 46352 1 loop 21508 2 unionfs 87264 1 nls_cp437 8320 1 isofs 39464 1 sg 41880 0 sr_mod 20132 1 cdrom 41512 1 sr_mod pata_amd 16772 1 pata_acpi 9856 0 floppy 69096 0 ata_generic 9988 0 libata 176304 4 sata_nv,pata_amd,pata_acpi,ata_generic scsi_mod 178488 3 sg,sr_mod,libata forcedeth 55564 0 ehci_hcd 41996 0 ohci_hcd 27524 0 usbcore 169904 4 cdc_acm,ehci_hcd,ohci_hcd thermal 19744 0 processor 41448 2 powernow_k8,thermal fan 6792 0 fbcon 46336 0 tileblit 4096 1 fbcon font 10112 1 fbcon bitblit 7424 1 fbcon softcursor 3712 1 bitblit fuse 56112 3
On 8/30/08, Dimitrios Symeonidis <[EMAIL PROTECTED]> wrote: > the module needed for your harddisk is sata_nv, which is not in restricted > modules, I was wrong. > So in hardy, can you try "sudo modprobe sata_nv"? > Also, the dmesg & lsmod output we need is from hardy, to see what is wrong. > Your outputs from feisty look alright... > > -- > hard disk device not detected in hardy heron 64 bit > https://bugs.launchpad.net/bugs/244375 > You received this bug notification because you are a direct subscriber > of the bug. > -- Bullet -- hard disk device not detected in hardy heron 64 bit https://bugs.launchpad.net/bugs/244375 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
