On Sun, 4 Oct 2009 14:36:18 +0300, Victor A Adrianovskiy <[email protected]> wrote: > Странно, что нестарый диск не умеет SMART. А smartctl -a /dev/sdb такой-же > вывод дает? Диски ведь одинаковые? >> r...@veo-server:~# smartctl -a /dev/sdc >> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 >> Bruce Allen >> Home page is http://smartmontools.sourceforge.net/ >> >> Short INQUIRY response, skip product id >> A mandatory SMART command failed: exiting. To continue, add one or more >> '-T permissive' options. >> >> r...@veo-server:~# smartctl -a -T permissive /dev/sdc >> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 >> Bruce Allen >> Home page is http://smartmontools.sourceforge.net/ >> >> Short INQUIRY response, skip product id >> SMART Health Status: OK >> Read defect list: asked for grown list but didn't get it >> >> Error Counter logging not supported >> Device does not support Self Test logging >> -- >> С уважением, Сергей. >> >> mailto:[email protected] >> >> -- >> ubuntu-ru mailing list >> [email protected] >> https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru >> Винты полностью одинаковые... вот что выводит sdb r...@veo-server:/home/veosrv/d# smartctl -a /dev/sdc smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/
Short INQUIRY response, skip product id A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. r...@veo-server:/home/veosrv/d# smartctl -a /dev/sdb smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD3202ABYS-01B7A0 Serial Number: WD-WCAT13927079 Firmware Version: 02.03B02 User Capacity: 320,072,933,376 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Oct 4 15:43:11 2009 MSD SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (6360) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 77) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 158 157 021 Pre-fail Always - 3100 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 24 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2426 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 24 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 20 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 24 194 Temperature_Celsius 0x0022 111 106 000 Old_age Always - 32 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 74 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 Warning: ATA error count 3 inconsistent with error log pointer 1 ATA Error Count: 3 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 occurred at disk power-on lifetime: 2373 hours (98 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 27 bf 10 1c ee Error: UNC 39 sectors at LBA = 0x0e1c10bf = 236720319 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 d8 0f 10 1c 0e 08 00:03:27.187 READ DMA c8 00 00 0f 0f 1c 0e 08 00:03:27.186 READ DMA c8 00 00 0f 0e 1c 0e 08 00:03:27.185 READ DMA c8 00 00 0f 0d 1c 0e 08 00:03:27.184 READ DMA Error 2 occurred at disk power-on lifetime: 2371 hours (98 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 4f 9f 9c f1 e0 Error: UNC 79 sectors at LBA = 0x00f19c9f = 15834271 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 d0 1f 9c f1 00 08 00:45:54.973 READ DMA c8 00 00 1f 9b f1 00 08 00:45:54.971 READ DMA c8 00 00 1f 9a f1 00 08 00:45:54.970 READ DMA c8 00 00 1f 99 f1 00 08 00:45:54.968 READ DMA c8 00 00 1f 98 f1 00 08 00:45:54.967 READ DMA Error 1 occurred at disk power-on lifetime: 2371 hours (98 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 5f bf 32 ac e0 Error: UNC 95 sectors at LBA = 0x00ac32bf = 11285183 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 1f 32 ac 00 08 00:34:24.214 READ DMA c8 00 00 1f 31 ac 00 08 00:34:24.213 READ DMA c8 00 00 1f 30 ac 00 08 00:34:24.212 READ DMA c8 00 00 1f 2f ac 00 08 00:34:24.210 READ DMA c8 00 00 1f 2e ac 00 08 00:34:24.209 READ DMA SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. -- С уважением, Сергей. mailto:[email protected] -- ubuntu-ru mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru
