Ну, значит SMART умеют, как и должно быть. А если отключить sdb, а на его место sdc поставить, ситуация никак не меняется? badblocks что-нибудь выдал? 4 октября 2009 г. 14:44 пользователь Sergey Alekseev <[email protected]>написал:
> On Sun, 4 Oct 2009 14:36:18 +0300, Victor A Adrianovskiy > <[email protected]> wrote: > > Странно, что нестарый диск не умеет SMART. А smartctl -a /dev/sdb > такой-же > > вывод дает? Диски ведь одинаковые? > >> r...@veo-server:~# smartctl -a /dev/sdc > >> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 > >> Bruce Allen > >> Home page is http://smartmontools.sourceforge.net/ > >> > >> Short INQUIRY response, skip product id > >> A mandatory SMART command failed: exiting. To continue, add one or more > >> '-T permissive' options. > >> > >> r...@veo-server:~# smartctl -a -T permissive /dev/sdc > >> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 > >> Bruce Allen > >> Home page is http://smartmontools.sourceforge.net/ > >> > >> Short INQUIRY response, skip product id > >> SMART Health Status: OK > >> Read defect list: asked for grown list but didn't get it > >> > >> Error Counter logging not supported > >> Device does not support Self Test logging > >> -- > >> С уважением, Сергей. > >> > >> mailto:[email protected] > >> > >> -- > >> ubuntu-ru mailing list > >> [email protected] > >> https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru > >> > Винты полностью одинаковые... вот что выводит sdb > r...@veo-server:/home/veosrv/d# smartctl -a /dev/sdc > smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 > Bruce Allen > Home page is http://smartmontools.sourceforge.net/ > > Short INQUIRY response, skip product id > A mandatory SMART command failed: exiting. To continue, add one or more > '-T permissive' options. > r...@veo-server:/home/veosrv/d# smartctl -a /dev/sdb > smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 > Bruce Allen > Home page is http://smartmontools.sourceforge.net/ > > === START OF INFORMATION SECTION === > Device Model: WDC WD3202ABYS-01B7A0 > Serial Number: WD-WCAT13927079 > Firmware Version: 02.03B02 > User Capacity: 320,072,933,376 bytes > Device is: Not in smartctl database [for details use: -P showall] > ATA Version is: 8 > ATA Standard is: Exact ATA specification draft version not indicated > Local Time is: Sun Oct 4 15:43:11 2009 MSD > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x84) Offline data collection activity > was suspended by an interrupting > command from host. > Auto Offline Data Collection: > Enabled. > Self-test execution status: ( 0) The previous self-test routine > completed > without error or no self-test has > ever > been run. > Total time to complete Offline > data collection: (6360) seconds. > Offline data collection > capabilities: (0x7b) SMART execute Offline immediate. > Auto Offline data collection on/off > support. > Suspend Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 77) minutes. > Conveyance self-test routine > recommended polling time: ( 5) minutes. > SCT capabilities: (0x303f) SCT Status supported. > SCT Feature Control supported. > SCT Data Table supported. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED > WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always > - 0 > 3 Spin_Up_Time 0x0027 158 157 021 Pre-fail Always > - 3100 > 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always > - 24 > 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always > - 0 > 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always > - 0 > 9 Power_On_Hours 0x0032 097 097 000 Old_age Always > - 2426 > 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always > - 0 > 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always > - 0 > 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always > - 24 > 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always > - 20 > 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always > - 24 > 194 Temperature_Celsius 0x0022 111 106 000 Old_age Always > - 32 > 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always > - 0 > 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always > - 0 > 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline > - 0 > 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always > - 74 > 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline > - 0 > > SMART Error Log Version: 1 > Warning: ATA error count 3 inconsistent with error log pointer 1 > > ATA Error Count: 3 > CR = Command Register [HEX] > FR = Features Register [HEX] > SC = Sector Count Register [HEX] > SN = Sector Number Register [HEX] > CL = Cylinder Low Register [HEX] > CH = Cylinder High Register [HEX] > DH = Device/Head Register [HEX] > DC = Device Command Register [HEX] > ER = Error register [HEX] > ST = Status register [HEX] > Powered_Up_Time is measured from power on, and printed as > DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, > SS=sec, and sss=millisec. It "wraps" after 49.710 days. > > Error 3 occurred at disk power-on lifetime: 2373 hours (98 days + 21 > hours) > When the command that caused the error occurred, the device was active > or idle. > > After command completion occurred, registers were: > ER ST SC SN CL CH DH > -- -- -- -- -- -- -- > 40 51 27 bf 10 1c ee Error: UNC 39 sectors at LBA = 0x0e1c10bf = > 236720319 > > Commands leading to the command that caused the error were: > CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name > -- -- -- -- -- -- -- -- ---------------- -------------------- > c8 00 d8 0f 10 1c 0e 08 00:03:27.187 READ DMA > c8 00 00 0f 0f 1c 0e 08 00:03:27.186 READ DMA > c8 00 00 0f 0e 1c 0e 08 00:03:27.185 READ DMA > c8 00 00 0f 0d 1c 0e 08 00:03:27.184 READ DMA > > Error 2 occurred at disk power-on lifetime: 2371 hours (98 days + 19 > hours) > When the command that caused the error occurred, the device was active > or idle. > > After command completion occurred, registers were: > ER ST SC SN CL CH DH > -- -- -- -- -- -- -- > 40 51 4f 9f 9c f1 e0 Error: UNC 79 sectors at LBA = 0x00f19c9f = > 15834271 > > Commands leading to the command that caused the error were: > CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name > -- -- -- -- -- -- -- -- ---------------- -------------------- > c8 00 d0 1f 9c f1 00 08 00:45:54.973 READ DMA > c8 00 00 1f 9b f1 00 08 00:45:54.971 READ DMA > c8 00 00 1f 9a f1 00 08 00:45:54.970 READ DMA > c8 00 00 1f 99 f1 00 08 00:45:54.968 READ DMA > c8 00 00 1f 98 f1 00 08 00:45:54.967 READ DMA > > Error 1 occurred at disk power-on lifetime: 2371 hours (98 days + 19 > hours) > When the command that caused the error occurred, the device was active > or idle. > > After command completion occurred, registers were: > ER ST SC SN CL CH DH > -- -- -- -- -- -- -- > 40 51 5f bf 32 ac e0 Error: UNC 95 sectors at LBA = 0x00ac32bf = > 11285183 > > Commands leading to the command that caused the error were: > CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name > -- -- -- -- -- -- -- -- ---------------- -------------------- > c8 00 00 1f 32 ac 00 08 00:34:24.214 READ DMA > c8 00 00 1f 31 ac 00 08 00:34:24.213 READ DMA > c8 00 00 1f 30 ac 00 08 00:34:24.212 READ DMA > c8 00 00 1f 2f ac 00 08 00:34:24.210 READ DMA > c8 00 00 1f 2e ac 00 08 00:34:24.209 READ DMA > > SMART Self-test log structure revision number 1 > No self-tests have been logged. [To run self-tests, use: smartctl -t] > > > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute > delay. > -- > С уважением, Сергей. > > mailto:[email protected] > > -- > ubuntu-ru mailing list > [email protected] > https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru >
-- ubuntu-ru mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru
