Hi, I'm almost close enough to make some sound with Ubuntu Studio, however i haven't been able to find some clear instructions to get my soundcard working, if anyone can give me some advice or direct me to the info i'd appreciate it.
this is as far as I've got so far>>>>>>>>>>>>>>>>>>> freebob and a realtime kernel are installed already in /etc/udev/rules.d/40-permissions.rules i changed KERNEL=="raw1394", GROUP="disk" to KERNEL=="raw1394", GROUP="audio" then I reloaded udev : # /etc/init.d/sudo udev restart reload raw1394 device : # sudo rmmod raw1394 # sudo modprobe raw1394 (only works with sudo - how can i change the permissions) [EMAIL PROTECTED]:~$ sudo jackd -d freebob [sudo] password for hamish: jackd 0.103.0 Copyright 2001-2005 Paul Davis and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK compiled with System V SHM support. loading driver .. Freebob using Firewire port 0, node -1 libiec61883 warning: Established connection on channel 0. You may need to manually set the channel on the receiving node. libiec61883 warning: Established connection on channel 1. You may need to manually set the channel on the transmitting node. but i can't get Qjackctl working properly seems i need to do everything as root how can i change the permissions perhaps that's all that's needed ________________________________________ -- Ubuntu-Studio-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
