hi i am trying to run my firewire terratec phase x24 with freebob under UbuntuStudio. I have been trying all kinds of solutions with no luck. This is the error i get when running qjackctl
********************** 22:00:58.210 /usr/bin/jackd -R -dfreebob -r44100 -p1024 -n2 -i0 -o0 22:00:58.211 JACK was started with PID=8876 (0x22ac). cannot write to jackstart sync pipe 4 (Bad file descriptor) jackd: wait for startup process exit failed jackd 0.102.20 Copyright 2001-2005 Paul Davis and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK compiled with System V SHM support. cannot remove `/dev/shm/jack-1002' (Permission denied) loading driver .. Freebob using Firewire port 0, node -1 [31mWarning (bebob_light/bebob_light_avdevice.cpp)[995] discoverStep10Plug: discoverStep10Plug: unknown stream format for channel (1) [0m[31mWarning (bebob_light/bebob_light_avdevice.cpp)[995] discoverStep10Plug: discoverStep10Plug: unknown stream format for channel (1) [0m[31mWarning (bebob_light/bebob_light_avdevice.cpp)[995] discoverStep10Plug: discoverStep10Plug: unknown stream format for channel (1) [0m[31mWarning (bebob_light/bebob_light_avdevice.cpp)[995] discoverStep10Plug: discoverStep10Plug: unknown stream format for channel (1) [0m[31mWarning (bebob_light/bebob_light_avdevice.cpp)[995] discoverStep10Plug: discoverStep10Plug: unknown stream format for channel (1) [0m[31mWarning (bebob_light/bebob_light_avdevice.cpp)[995] discoverStep10Plug: discoverStep10Plug: unknown stream format for channel (1) [0m[31mWarning (bebob_light/bebob_light_avdevice.cpp)[995] discoverStep10Plug: discoverStep10Plug: unknown stream format for channel (1) [0m[31mWarning (bebob_light/bebob_light_avdevice.cpp)[995] discoverStep10Plug: discoverStep10Plug: unknown stream format for channel (1) [0m[31mWarning (bebob_light/bebob_light_avdevice.cpp)[995] discoverStep10Plug: discoverStep10Plug: unknown stream format for channel (1) [0m[31mWarning (bebob_light/bebob_light_avdevice.cpp)[995] discoverStep10Plug: discoverStep10Plug: unknown stream format for channel (1) [0m[31mWarning (bebob_light/bebob_light_avdevice.cpp)[995] discoverStep10Plug: discoverStep10Plug: unknown stream format for channel (1) [0m[31mWarning (bebob_light/bebob_light_avdevice.cpp)[995] discoverStep10Plug: discoverStep10Plug: unknown stream format for channel (1) FreeBoB ERR: FREEBOB: Error creating virtual device [0mcannot load driver module freebob 22:00:59.313 JACK was stopped successfully. 22:00:59.313 Post-shutdown script... 22:00:59.314 killall jackd jackd: ez da prozesurik hil 22:00:59.535 Post-shutdown script terminated with exit status=256. 22:01:00.274 Could not connect to JACK server as client. Please check the messages window for more info. ********************** if i run qjackctl as sudo the only difference is that i dont get the "cannot remove `/dev/shm/jack-1002' (Permission denied)" but the rest is the same. I can see that raw1394 is loaded if i do lsmod. I already tried changing permissions to /dev/raw1394 and I also tried to change sudo gedit /etc/udev/rules.d/40-permissions.rules KERNEL=="raw1394", GROUP="disk" to KERNEL=="raw1394", GROUP="audio" same error always. I am trying to reset the bus with scanbus and restarting the machine but no changes at all. I am running 2.6.20-16-lowlatency kernel with ubuntu Feisty on a IBM X32 laptop. The funniest of all is that I tried to run PureDyne live cd and the soundcard works fine out of the box. So it can be done... any tips will be welcome. thanks enrike -- Ubuntu-Studio-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
