On Thu, Oct 24, 2013 at 10:36 PM, Eddie Coffey <[email protected]> wrote:
> with a stereo track, it clips with a phantom powered mic with no power on > the mic. The mute button doesn't stop it. am confused. > id keep it simple in the beginning.. just try and get something playing back through the unit. try and get something playing back through some effects or other software, then through the unit. if ardour is confusing, test with something simpler when you get to testing audio input. remember that, as far as i see it, you are just a few hours from having gotten this thing working in linux, so, relax.. there are many things to absorb. good luck! > > > On Thu, Oct 24, 2013 at 9:27 PM, Eddie Coffey <[email protected]> wrote: > >> something i've noticed in ardour, is if i create a mono track, i barely >> get a signal, if a create a stereo track, i get so much signal i can't >> control it. i can run the volume on the track all the way to zero and it >> still clips, so any ideas? >> >> >> On Thu, Oct 24, 2013 at 8:37 PM, Eddie Coffey <[email protected]>wrote: >> >>> eddie@eddie-MS-7529:~$ amixer -c1 >>> Simple mixer control 'Input Volume Control',0 >>> Capabilities: cvolume penum >>> Capture channels: Front Left - Front Right >>> Limits: Capture 0 - 75 >>> Front Left: Capture 75 [100%] [75.00dB] >>> Front Right: Capture 75 [100%] [75.00dB] >>> Simple mixer control 'Output Volume Control',0 >>> Capabilities: pvolume pswitch penum >>> Playback channels: Front Left - Front Right - Rear Left - Rear Right >>> Limits: Playback 0 - 64 >>> Mono: >>> Front Left: Playback 64 [100%] [0.00dB] [on] >>> Front Right: Playback 64 [100%] [0.00dB] [on] >>> Rear Left: Playback 64 [100%] [0.00dB] [on] >>> Rear Right: Playback 64 [100%] [0.00dB] [on] >>> Simple mixer control 'Output Volume Control',1 >>> Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum >>> Playback channels: Mono >>> Limits: Playback 0 - 64 >>> Mono: Playback 64 [100%] [0.00dB] [on] >>> eddie@eddie-MS-7529:~$ >>> >>> >>> On Thu, Oct 24, 2013 at 8:21 PM, Ralf Mardorf < >>> [email protected]> wrote: >>> >>>> On Thu, 2013-10-24 at 19:55 -0500, Eddie Coffey wrote: >>>> > In jack i chose hw1, which is duet usb, for input and output device. >>>> > In alsa mixer in the capture screen initally the digital output was 24 >>>> > and all other outputs in the capture screen were 0. I maxed the >>>> > digital, capture1 capture L&R, front and rear mic imputs out. With a >>>> > sm58 mic, I am getting some signal, but not usable. still not getting >>>> > any phantom power >>>> >>>> amixer -c1 contents >>>> >>>> >>>> >>>> -- >>>> ubuntu-studio-users mailing list >>>> [email protected] >>>> Modify settings or unsubscribe at: >>>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users >>>> >>> >>> >> > > -- > ubuntu-studio-users mailing list > [email protected] > Modify settings or unsubscribe at: > https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users > > -- MH mikeholstein.info <http://www.mikeholstein.info/>
-- ubuntu-studio-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
