yes thats true. what i could find out from searching was that apogee didn't support linux, but was an old post. was hoping things had changed, will see. if it doesn't, no harm no foul. will exhaust all settings in jack and alsa to make sure.
On Thu, Oct 24, 2013 at 10:20 PM, Mike Holstein <[email protected]> wrote: > > > > On Thu, Oct 24, 2013 at 11:11 PM, Eddie Coffey <[email protected]>wrote: > >> I want to thank everyone for their imput. This is the first usb powered >> device i have tried with ubuntu. I borrowed it from my son, who uses a mac >> book pro.I figure if the system sees it, I should be able to make it work. >> If successful i will post settings for anyone else wanting to use it. thank >> once again everyone for their help >> > > not really any figuring to it. just because you plug something in and it > reports a name to linux via USB doesnt mean its going to work. you might be > able to get it working, but it might not be supported. i dont think apogee > supports linux, so, as with any device like that without support for the OS > you are using, you might not get support. wont hurt to try, though i would > keep in mind that it may actually not work. good luck again! > > >> >> >> On Thu, Oct 24, 2013 at 10:00 PM, Mike Holstein <[email protected]>wrote: >> >>> >>> >>> >>> On Thu, Oct 24, 2013 at 10:36 PM, Eddie Coffey <[email protected]>wrote: >>> >>>> with a stereo track, it clips with a phantom powered mic with no power >>>> on the mic. The mute button doesn't stop it. am confused. >>>> >>> >>> id keep it simple in the beginning.. just try and get something playing >>> back through the unit. try and get something playing back through some >>> effects or other software, then through the unit. if ardour is confusing, >>> test with something simpler when you get to testing audio input. remember >>> that, as far as i see it, you are just a few hours from having gotten this >>> thing working in linux, so, relax.. there are many things to absorb. good >>> luck! >>> >>> >>>> >>>> >>>> On Thu, Oct 24, 2013 at 9:27 PM, Eddie Coffey <[email protected]>wrote: >>>> >>>>> something i've noticed in ardour, is if i create a mono track, i >>>>> barely get a signal, if a create a stereo track, i get so much signal i >>>>> can't control it. i can run the volume on the track all the way to zero >>>>> and >>>>> it still clips, so any ideas? >>>>> >>>>> >>>>> On Thu, Oct 24, 2013 at 8:37 PM, Eddie Coffey <[email protected]>wrote: >>>>> >>>>>> eddie@eddie-MS-7529:~$ amixer -c1 >>>>>> Simple mixer control 'Input Volume Control',0 >>>>>> Capabilities: cvolume penum >>>>>> Capture channels: Front Left - Front Right >>>>>> Limits: Capture 0 - 75 >>>>>> Front Left: Capture 75 [100%] [75.00dB] >>>>>> Front Right: Capture 75 [100%] [75.00dB] >>>>>> Simple mixer control 'Output Volume Control',0 >>>>>> Capabilities: pvolume pswitch penum >>>>>> Playback channels: Front Left - Front Right - Rear Left - Rear Right >>>>>> Limits: Playback 0 - 64 >>>>>> Mono: >>>>>> Front Left: Playback 64 [100%] [0.00dB] [on] >>>>>> Front Right: Playback 64 [100%] [0.00dB] [on] >>>>>> Rear Left: Playback 64 [100%] [0.00dB] [on] >>>>>> Rear Right: Playback 64 [100%] [0.00dB] [on] >>>>>> Simple mixer control 'Output Volume Control',1 >>>>>> Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum >>>>>> Playback channels: Mono >>>>>> Limits: Playback 0 - 64 >>>>>> Mono: Playback 64 [100%] [0.00dB] [on] >>>>>> eddie@eddie-MS-7529:~$ >>>>>> >>>>>> >>>>>> On Thu, Oct 24, 2013 at 8:21 PM, Ralf Mardorf < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> On Thu, 2013-10-24 at 19:55 -0500, Eddie Coffey wrote: >>>>>>> > In jack i chose hw1, which is duet usb, for input and output >>>>>>> device. >>>>>>> > In alsa mixer in the capture screen initally the digital output >>>>>>> was 24 >>>>>>> > and all other outputs in the capture screen were 0. I maxed the >>>>>>> > digital, capture1 capture L&R, front and rear mic imputs out. With >>>>>>> a >>>>>>> > sm58 mic, I am getting some signal, but not usable. still not >>>>>>> getting >>>>>>> > any phantom power >>>>>>> >>>>>>> amixer -c1 contents >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> ubuntu-studio-users mailing list >>>>>>> [email protected] >>>>>>> Modify settings or unsubscribe at: >>>>>>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users >>>>>>> >>>>>> >>>>>> >>>>> >>>> >>>> -- >>>> ubuntu-studio-users mailing list >>>> [email protected] >>>> Modify settings or unsubscribe at: >>>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users >>>> >>>> >>> >>> >>> -- >>> MH >>> >>> mikeholstein.info <http://www.mikeholstein.info/> >>> >>> >>> -- >>> ubuntu-studio-users mailing list >>> [email protected] >>> Modify settings or unsubscribe at: >>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users >>> >>> >> >> -- >> ubuntu-studio-users mailing list >> [email protected] >> Modify settings or unsubscribe at: >> https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users >> >> > > > -- > MH > > mikeholstein.info <http://www.mikeholstein.info/> > > > -- > ubuntu-studio-users mailing list > [email protected] > Modify settings or unsubscribe at: > https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users > >
-- ubuntu-studio-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
