PS: FFADO-mixer doesn't appear to work: mac@RECORD1:~$ ffado-mixer ----------------------------------------------- FFADO Control DBUS service Part of the FFADO project -- www.ffado.org Version: 2.1.9999- (C) 2008, Pieter Palmers This program comes with ABSOLUTELY NO WARRANTY. -----------------------------------------------
Discovering devices... 01088192042: Warning (efc_avc_cmd.cpp)[ 90] deserialize: Deserialization failed 01088492031: Warning (efc_avc_cmd.cpp)[ 90] deserialize: Deserialization failed 01088692161: Error (fireworks_device.cpp)[ 230] doEfcOverAVC: EfcOverAVCCmd command failed 01088692195: Error (fireworks_device.cpp)[ 776] readFlash: Flash read failed for block 0x00008000 (64 quadlets) 01088692200: Error (fireworks_session_block.cpp)[ 129] loadFromDevice: Flash read failed 01088692206: Error (fireworks_device.cpp)[ 452] loadSession: Could not load session block 01088692209: Warning (fireworks_device.cpp)[ 392] buildMixer: Could not load session 01088911030: Warning (efc_avc_cmd.cpp)[ 90] deserialize: Deserialization failed 01089203043: Warning (efc_avc_cmd.cpp)[ 90] deserialize: Deserialization failed 01089403176: Error (fireworks_device.cpp)[ 230] doEfcOverAVC: EfcOverAVCCmd command failed 01089403196: Error (fireworks_device.cpp)[ 651] getClock: Could not get clock info 01089616032: Warning (efc_avc_cmd.cpp)[ 90] deserialize: Deserialization failed 01089911031: Warning (efc_avc_cmd.cpp)[ 90] deserialize: Deserialization failed 01090111167: Error (fireworks_device.cpp)[ 230] doEfcOverAVC: EfcOverAVCCmd command failed DBUS service running press ctrl-c to stop it & exit 01092798027: Warning (efc_avc_cmd.cpp)[ 90] deserialize: Deserialization failed 01093091027: Warning (efc_avc_cmd.cpp)[ 90] deserialize: Deserialization failed 01093291151: Error (fireworks_device.cpp)[ 230] doEfcOverAVC: EfcOverAVCCmd command failed 01093291178: Error (fireworks_device.cpp)[ 651] getClock: Could not get clock info .... many more lines like above The GUI appears but, it won't identify the device, save setting button is grayed out, clock source & sample rate grayed out, etc. On Sat, Nov 9, 2013 at 9:06 AM, Mac <[email protected]> wrote: > Takashi, > > I installed your PPA in a new install of 13.10 with a AF12 that has 5.8 > firmware. > > I have not done extensive testing but it does appear to work. (Before it > would not even start) > > I have various setups and will test as time allows. > > Any chance of getting a 12.04 package? (this would allow me to quickly > test on a AF12 with 4.7 firmware) > > I don't know if I'll have time in the near future, but I've confirmed up > to three AF12 on the same bus in the past. > > Regards, > Mac > > > On Thu, Nov 7, 2013 at 12:09 AM, Takashi Sakamoto <[email protected] > > wrote: > >> Hi, >> >> I'm a developer of FFADO upstream and recently work for improvement of >> AudioFire driver. This year, I spend much hours with Ubuntu Studio and >> low-latency kernel for my developing and have no problems about host >> controller. >> >> > bart >> >> As a quick grance of your logs, firewire_ohci/firewire_core is not >> loaded. So let's try to modprobe them. Then check if character devices >> exists (/dev/fw*). >> >> If you can see /dev/fw0 and /dev/fw1, FFADO can driver your AudioFire. >> >> > Mac and Kaj >> >> I confirmed that FFADO cannot drive AudioFire12 (and maybe AudioFire8) >> with firmware version 5.2.1 or later. Recently I committed my workaround >> for this issue to revision 2451-2453 and need testers. Would you please >> test the recent FFADO? You can get debian package for lucid and saucy from >> my PPA. >> https://launchpad.net/~mocchi/+archive/instruments >> >> If you need package for other Ubuntu version, please inform me. I'll >> upload it into my PPA. >> >> >> Regards >> >> Takashi Sakamoto >> >> >> (2013年11月06日 06:32), bart deruyter wrote: >> >>> Hi guys, >>> >>> last attempt to find help before I do a fresh install: >>> >>> I have quite an issue with my audiofire12 (firewiredevice) since I >>> upgraded to 13.10. Firewire worked at first, but yesterday morning there >>> was 'nothing', no sound, no firewiredevice detected by the system. >>> >>> I have been busy half a day on trying out different things, nothing >>> seems to have worked so far, so now I'll ask it through this mailing >>> list: how can I fix it? >>> >>> For starters, I have the output of ffado-diag added here, if that would >>> show interesting things to solve it. I see the new firewire stack is >>> present, not loaded on boot, not activated and /dev/raw1394 is not >>> present. >>> >>> My guess that is the issue, so how do I get this stack loaded on boot, >>> active and with /dev/raw1394 node present, if that's necessary, and is >>> it the new firewire stack that I have to use in 13.10? >>> >>> FFADO diagnostic utility 2.1.9999- >>> ============================ >>> (C) 2008 Pieter Palmers >>> 2009-2010 Arnold Krille >>> >>> >>> === CHECK === >>> Base system... >>> kernel version............ 3.11.0-11-lowlatency >>> Preempt (low latency)... True >>> RT patched.............. False >>> old 1394 stack present.... False >>> old 1394 stack loaded..... False >>> old 1394 stack active..... False >>> new 1394 stack present.... True >>> new 1394 stack loaded..... False >>> new 1394 stack active..... False >>> /dev/raw1394 node present. False >>> User IDs: >>> UID=1000(bart) GID=1000(bart) >>> groepen=1000(bart),4(adm),20(dialout),21(fax),24(cdrom),25( >>> floppy),27(sudo),29(audio),30(dip),33(www-data),44(video), >>> 46(plugdev),100(users),103(syslog),107(scanner),109( >>> lpadmin),123(sambashare),124(debian-tor),128(vboxusers),65534(nogroup) >>> Prerequisites (dynamic at run-time)... >>> gcc ............... gcc (Ubuntu/Linaro 4.8.1-10ubuntu8) 4.8.1 >>> g++ ............... g++ (Ubuntu/Linaro 4.8.1-10ubuntu8) 4.8.1 >>> PyQt4 (by pyuic4) . Python User Interface Compiler 4.10.3 for Qt >>> version 4.8.4 >>> jackd ............. no message buffer overruns >>> path ............ /usr/bin/jackd >>> flags ........... Package jack was not found in the pkg-config >>> search path. >>> Perhaps you should add the directory containing `jack.pc' >>> to the PKG_CONFIG_PATH environment variable >>> No package 'jack' found >>> libraw1394 ........ Package libraw1394 was not found in the >>> pkg-config search path. >>> Perhaps you should add the directory containing `libraw1394.pc' >>> to the PKG_CONFIG_PATH environment variable >>> No package 'libraw1394' found >>> flags ........... Package libraw1394 was not found in the >>> pkg-config search path. >>> Perhaps you should add the directory containing `libraw1394.pc' >>> to the PKG_CONFIG_PATH environment variable >>> No package 'libraw1394' found >>> libavc1394 ........ Package libavc1394 was not found in the >>> pkg-config search path. >>> Perhaps you should add the directory containing `libavc1394.pc' >>> to the PKG_CONFIG_PATH environment variable >>> No package 'libavc1394' found >>> flags ........... Package libavc1394 was not found in the >>> pkg-config search path. >>> Perhaps you should add the directory containing `libavc1394.pc' >>> to the PKG_CONFIG_PATH environment variable >>> No package 'libavc1394' found >>> libiec61883 ....... Package libiec61883 was not found in the >>> pkg-config search path. >>> Perhaps you should add the directory containing `libiec61883.pc' >>> to the PKG_CONFIG_PATH environment variable >>> No package 'libiec61883' found >>> flags ........... Package libiec61883 was not found in the >>> pkg-config search path. >>> Perhaps you should add the directory containing `libiec61883.pc' >>> to the PKG_CONFIG_PATH environment variable >>> No package 'libiec61883' found >>> libxml++-2.6 ...... Package libxml++-2.6 was not found in the >>> pkg-config search path. >>> Perhaps you should add the directory containing `libxml++-2.6.pc' >>> to the PKG_CONFIG_PATH environment variable >>> No package 'libxml++-2.6' found >>> flags ........... Package libxml++-2.6 was not found in the >>> pkg-config search path. >>> Perhaps you should add the directory containing `libxml++-2.6.pc' >>> to the PKG_CONFIG_PATH environment variable >>> No package 'libxml++-2.6' found >>> dbus-1 ............ 1.6.12 >>> flags ........... -I/usr/include/dbus-1.0 >>> -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -ldbus-1 >>> Prerequisites (static at compile-time)... >>> gcc ............... gcc (Ubuntu/Linaro 4.7.2-20ubuntu1) 4.7.2 >>> g++ ............... g++ (Ubuntu/Linaro 4.7.2-20ubuntu1) 4.7.2 >>> PyQt4 (by pyuic4) . Python User Interface Compiler 4.9.6 for Qt >>> version 4.8.3 >>> jackd ............. sh: 1: jackd: not found >>> path ............ >>> flags ........... Package jack was not found in the pkg-config >>> search path. >>> libraw1394 ........ 2.0.9 >>> flags ........... -lraw1394 >>> libavc1394 ........ Package libavc1394 was not found in the >>> pkg-config search path. >>> flags ........... Package libavc1394 was not found in the >>> pkg-config search path. >>> libiec61883 ....... 1.2.0 >>> flags ........... -liec61883 -lraw1394 >>> libxml++-2.6 ...... 2.34.2 >>> flags ........... -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 >>> -I/usr/lib/x86_64-linux-gnu/glibmm-2.4/include -I/usr/include/sigc++-2.0 >>> -I/usr/lib/x86_64-linux-gnu/sigc++-2.0/include -I/usr/include/glib-2.0 >>> -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libxml++-2.6 >>> -I/usr/lib/libxml++-2.6/include -lxml++-2.6 -lxml2 -lglibmm-2.4 >>> -lgobject-2.0 -lsigc-2.0 -lglib-2.0 >>> dbus-1 ............ 1.6.8 >>> flags ........... -I/usr/include/dbus-1.0 >>> -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -ldbus-1 >>> uname -a... >>> Linux bart-PC 3.11.0-11-lowlatency #4-Ubuntu SMP PREEMPT Wed Oct 2 >>> 22:48:21 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux >>> Hardware... >>> Host controllers: >>> CPU info: >>> Architecture: x86_64 >>> CPU-modus(sen): 32-bit, 64-bit >>> Byte Order: Little Endian >>> CPU(s): 8 >>> On-line CPU(s) list: 0-7 >>> Draden per kern: 2 >>> Kern(en) per voet: 4 >>> Socket(s): 1 >>> NUMA-node(s): 1 >>> Producent-ID: GenuineIntel >>> CPU-familie: 6 >>> Model: 42 >>> Stepping: 7 >>> CPU-frequentie (MHz): 3701.000 >>> BogoMIPS: 6784.21 >>> Virtualisatie: VT-x >>> L1d-cache: 32K >>> L1i-cache: 32K >>> L2-cache: 256K >>> L3-cache: 8192K >>> NUMA node0 CPU(s): 0-7 >>> Configuration... >>> IRQ information >>> Hardware Interrupts: >>> -------------------- >>> IRQ 0: PID: None, count: [25, 0, 0, 0, 0, 0, 0, 0], Sched None >>> (priority None), drivers: ['timer'] >>> IRQ 1: PID: None, count: [85, 0, 0, 0, 0, 0, 0, 0], Sched None >>> (priority None), drivers: ['i8042'] >>> IRQ 4: PID: None, count: [4, 0, 0, 0, 0, 0, 0, 0], Sched None >>> (priority None), drivers: [''] >>> IRQ 8: PID: None, count: [1, 0, 0, 0, 0, 0, 0, 0], Sched None >>> (priority None), drivers: ['rtc0'] >>> IRQ 9: PID: None, count: [0, 0, 0, 0, 0, 0, 0, 0], Sched None >>> (priority None), drivers: ['acpi'] >>> IRQ 16: PID: None, count: [62, 2753, 0, 1571, 0, 0, 0, 0], Sched >>> None (priority None), drivers: ['nvidia'] >>> IRQ 17: PID: None, count: [186, 0, 0, 0, 0, 0, 0, 0], Sched None >>> (priority None), drivers: ['snd_hda_intel'] >>> IRQ 18: PID: None, count: [231151, 0, 373, 0, 0, 0, 0, 0], Sched >>> None (priority None), drivers: ['ehci_hcd:usb1'] >>> IRQ 19: PID: None, count: [13004, 0, 77457, 0, 0, 0, 0, 0], Sched >>> None (priority None), drivers: ['ata_piix', 'ata_piix'] >>> IRQ 23: PID: None, count: [463, 1347, 0, 100, 0, 0, 0, 0], Sched >>> None (priority None), drivers: ['ehci_hcd:usb2'] >>> IRQ 42: PID: None, count: [0, 0, 0, 0, 0, 0, 0, 0], Sched None >>> (priority None), drivers: ['xhci_hcd'] >>> IRQ 43: PID: None, count: [0, 0, 0, 0, 0, 0, 0, 0], Sched None >>> (priority None), drivers: ['xhci_hcd'] >>> IRQ 44: PID: None, count: [105, 13896, 0, 1583, 0, 0, 0, 0], Sched >>> None (priority None), drivers: ['eth0'] >>> IRQ 45: PID: None, count: [0, 0, 0, 0, 0, 0, 0, 0], Sched None >>> (priority None), drivers: ['ahci'] >>> IRQ 46: PID: None, count: [10, 0, 0, 0, 0, 0, 0, 0], Sched None >>> (priority None), drivers: ['mei_me'] >>> IRQ 47: PID: None, count: [593, 0, 0, 0, 0, 0, 0, 0], Sched None >>> (priority None), drivers: ['snd_hda_intel'] >>> >>> Software Interrupts: >>> -------------------- >>> >>> >>> === REPORT === >>> FireWire kernel drivers: >>> >>> FireWire kernel stack not present. Please compile the kernel with >>> FireWire support. >>> >>> >>> >>> >>> http://www.bartart3d.be/ >>> On facebook <https://www.facebook.com/pages/BartArt3D/169488999795102> >>> On Twitter <https://twitter.com/#%21/Bart_Issimo> >>> On Identi.ca <http://identi.ca/bartart3d> >>> On Google+ <https://plus.google.com/u/0/b/116379400376517483499/> >>> >>> >>> >> >> -- >> ubuntu-studio-users mailing list >> [email protected] >> Modify settings or unsubscribe at: https://lists.ubuntu.com/ >> mailman/listinfo/ubuntu-studio-users >> > >
-- ubuntu-studio-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
