On Wed, Mar 30, 2016 at 4:02 PM, Joao Bruno <[email protected]> wrote:
> looks like now is working well, should be that change of buttons on the > interface, now i used the one on the right and starts by itself working > well, without start in jackd in terminal. > To be honest never noticed that button before.. > > Thank you very much, JB > > PS- i will make several trials and if still working good i will put as > solved. > > On Wed, Mar 30, 2016 at 3:44 PM, Joao Bruno <[email protected]> > wrote: > >> Ok, I will do it. Just to be more precise, QjackCtl only works after I >> run jackd from terminal and after run a software, I'm using ardour, if I >> run QjackCtl before open ardour it fails and send me the usual failure >> message. >> On 30 Mar 2016 5:36 p.m., "Kaj Ailomaa" <[email protected]> wrote: >> >>> On Wed, Mar 30, 2016, at 04:33 PM, Kaj Ailomaa wrote: >>> > On Wed, Mar 30, 2016, at 04:10 PM, Joao Bruno wrote: >>> > > In this case I put default, but I also did it with the both devices >>> that >>> > > appears, hw:0 or plughw:0, doesn't work as well. At this moment I >>> started >>> > > jackd by the terminal and after opened the QjackCtl and looks like is >>> > > working correctly, with the settings as default. >>> > > >>> > > Thank you, it was by your advice that jackd was working by terminal >>> that >>> > > I >>> > > did this way, at least is working, not by the regular way but is >>> > > working. >>> > > >>> > > Thank you very much, JB >>> > > >>> > default means hw:0. Better to choose the correct device in >>> "Interface", >>> > rather than default. Why? Because each time you boot your computer, >>> the >>> > device may be in a different order. >>> > >>> > Again, under "Interface", select the correct device, the start jack. >>> >>> btw, there are two buttons next to "Interface". Confusing, I know. It is >>> the one to the right you should use, no the one to the left. >>> >>> -- >>> ubuntu-studio-users mailing list >>> [email protected] >>> Modify settings or unsubscribe at: >>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users >>> >> >
-- ubuntu-studio-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
