working well. Thank you very much again,
Best Regards,JB On Wed, Mar 30, 2016 at 4:08 PM, Joao Bruno <[email protected]> wrote: > > > On Wed, Mar 30, 2016 at 4:02 PM, Joao Bruno <[email protected]> > wrote: > >> looks like now is working well, should be that change of buttons on the >> interface, now i used the one on the right and starts by itself working >> well, without start in jackd in terminal. >> To be honest never noticed that button before.. >> >> Thank you very much, JB >> >> PS- i will make several trials and if still working good i will put as >> solved. >> >> On Wed, Mar 30, 2016 at 3:44 PM, Joao Bruno <[email protected]> >> wrote: >> >>> Ok, I will do it. Just to be more precise, QjackCtl only works after I >>> run jackd from terminal and after run a software, I'm using ardour, if I >>> run QjackCtl before open ardour it fails and send me the usual failure >>> message. >>> On 30 Mar 2016 5:36 p.m., "Kaj Ailomaa" <[email protected]> wrote: >>> >>>> On Wed, Mar 30, 2016, at 04:33 PM, Kaj Ailomaa wrote: >>>> > On Wed, Mar 30, 2016, at 04:10 PM, Joao Bruno wrote: >>>> > > In this case I put default, but I also did it with the both >>>> devices that >>>> > > appears, hw:0 or plughw:0, doesn't work as well. At this moment I >>>> started >>>> > > jackd by the terminal and after opened the QjackCtl and looks like >>>> is >>>> > > working correctly, with the settings as default. >>>> > > >>>> > > Thank you, it was by your advice that jackd was working by terminal >>>> that >>>> > > I >>>> > > did this way, at least is working, not by the regular way but is >>>> > > working. >>>> > > >>>> > > Thank you very much, JB >>>> > > >>>> > default means hw:0. Better to choose the correct device in >>>> "Interface", >>>> > rather than default. Why? Because each time you boot your computer, >>>> the >>>> > device may be in a different order. >>>> > >>>> > Again, under "Interface", select the correct device, the start jack. >>>> >>>> btw, there are two buttons next to "Interface". Confusing, I know. It is >>>> the one to the right you should use, no the one to the left. >>>> >>>> -- >>>> ubuntu-studio-users mailing list >>>> [email protected] >>>> Modify settings or unsubscribe at: >>>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users >>>> >>> >> >
-- ubuntu-studio-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
