Sorry for this late reply.
Have you tried using OCD commander?
This is a simple, low-level (assembly) debugger that Macraigor provides
for free from their website.
This is a good start to make sure that your JTAG communicates well with
your board.
If you get communication errors trying to connecte using this program
too, you probably either have hw problems, or need to configure your
JTAG device to run with a slower clock.
Are you using a genuine Montejade board or a host that is based on this?
We initially worked fine with the Montejade, but when we went to our own
host we had small HW discrepencies that caused problems with the JTAG
until we figured them out.
- Arnon
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Siegfried M?ller
Sent: Tuesday, February 13, 2007 18:13
To: [email protected]
Subject: [uClinux-dev] Flash programming with Macraigor and IXP425
Arnon,
thank you. I tried the two ocd files, but at me it doesn't work. It
seems that the flashprogrammer software is the problem, because my
montejade ist doing fine.
Do you know which version you used? My version is V2.6.0
Siegfried
-- Disclaimer: --
This e-mail is intended solely for the person to whom it is addressed and may
contain confidential or legally privileged information. Access to this e-mail
by anyone else is unauthorized. If an addressing or transmission error has
misdirected this e-mail, please notify the author by replying to this e-mail
and destroy this e-mail and any attachments.
E-mail may be susceptible to data corruption, interception, unauthorized
amendment, viruses and delays or the consequences thereof. If you are not the
intended recipient, be advised that you have received this email in error and
that any use, dissemination, forwarding, printing or copying of this email is
strictly prohibited.
_______________________________________________
uClinux-dev mailing list
[email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
