Roger,
I agree with Andrew.
It would be much easier if you compile your code with
gcc rather then CodeWarrior.
Regards,
Fabio Estevam
--- Andrew Webster <[EMAIL PROTECTED]> wrote:
> Why not use gcc instead of codewarrior?
>
> Andrew
>
>
> On 4/5/07, Roger Feltrin Escanhola
> <[EMAIL PROTECTED]> wrote:
> >
> > Hi Kalyan,
> >
> >
> >
> > Thanks for advice, but it didn't work. I tried to
> compile a new kernel
> > image using "make r", but the image was not
> created, an error occurred
> > during the compilation.
> >
> > I am coping the end of the error message below:
> >
> >
> >
> > In file included from ctype.c:34:
> >
> > ../../../include/stdlib.h:494: warning:
> '__malloc__' attribute ignored
> >
> > m68k-elf-strip -x -R .note -R .comment .o
> >
> > m68k-elf-gcc -Wall -Wstrict-prototypes
> -Wno-trigraphs -fno
> > -strict-aliasing -Os -funit-at-a-time -m5307
> -DCONFIG_COLDFIRE -O2 -g -
> > fomit-frame-pointer -pipe -fno-common -fno-builtin
> -Wall -DEMBED -msep
> > -data -fno-stack-protector -fno-builtin
> -nostdinc -D_LIBC
> > -I../../../include -I.
>
-isystem/usr/local/lib/gcc/m68k-uclinux/4.1.1/include
> -DNDEBUG -DL_
> > ctype.c -c -o .o
> >
> > In file included from ctype.c:34:
> >
> > ../../../include/stdlib.h:494: warning:
> '__malloc__' attribute ignored
> >
> > m68k-elf-strip -x -R .note -R .comment .o
> >
> > m68k-elf-gcc -Wall -Wstrict-prototypes
> -Wno-trigraphs -fno
> > -strict-aliasing -Os -funit-at-a-time -m5307
> -DCONFIG_COLDFIRE -O2 -g -
> > fomit-frame-pointer -pipe -fno-common -fno-builtin
> -Wall -DEMBED -msep
> > -data -fno-stack-protector -fno-builtin
> -nostdinc -D_LIBC
> > -I../../../include -I.
>
-isystem/usr/local/lib/gcc/m68k-uclinux/4.1.1/include
> -DNDEBUG -DL_
> > ctype.c -c -o .o
> >
> > In file included from ctype.c:34:
> >
> > ../../../include/stdlib.h:494: warning:
> '__malloc__' attribute ignored
> >
> > m68k-elf-strip -x -R .note -R .comment .o
> >
> > m68k-elf-ar r ../../../libc/libc.a isalnum.o
> isalpha.o isascii.o iscntrl.o
> > isdigit.o isgraph.o islower.o isprint.o ispunct.o
> isspace.o isupper.o
> > isxdigit.o toascii.o tolower.o toupper.o isblank.o
> isxlower.o isxupper.o__
> > C_ctype_b.o __C_ctype_tolower.o
> __C_ctype_toupper.o __ctype_b_loc.o __
> > ctype_tolower_loc.o __ctype_toupper_loc.o
> __ctype_assert.o isctype.o
> >
> > m68k-elf-ar: isalnum.o: No such file or directory
> >
> > make[6]: *** [ar-target] Error 1
> >
> > make[6]: Leaving directory `/
> > home/roger/uClinux-dist/uClibc/libc/misc/ctype'
> >
> > make[5]: *** [_dir_ctype] Error 2
> >
> > make[5]: Leaving directory
> `/home/roger/uClinux-dist/uClibc/libc/misc'
> >
> > make[4]: *** [_dir_misc] Error 2
> >
> > make[4]: Leaving directory
> `/home/roger/uClinux-dist/uClibc/libc'
> >
> > make[3]: ** [_dir_libc] Erro 2
> >
> > make[3]: Leaving directory
> `/home/roger/uClinux-dist/uClibc'
> >
> > make[2]: ** [uClibc] Erro 2
> >
> > make[2]: Leaving directory
> `/home/roger/uClinux-dist/lib'
> >
> > make[1]: ** [all] Erro 2
> >
> > make[1]: Leaving directory
> `/home/roger/uClinux-dist/lib'
> >
> > make: ** [subdirs] Erro 1
> >
> >
> >
> > Any suggestion to fix this?
> >
> >
> >
> > Regards
> >
> >
> >
> >
> >
> > <http://www.v2telecom.com.br/>
> > Roger Feltrin Escanhola
> > 55 11 3094.3939
> >
> > -----Mensagem original-----
> > *De:* [EMAIL PROTECTED] [mailto:
> > [EMAIL PROTECTED] *Em nome de
> *Kalyan Tej
> > *Enviada em:* quinta-feira, 5 de abril de 2007
> 01:07
> > *Para:* uClinux development list
> > *Assunto:* RE: [uClinux-dev] elf2flt
> >
> >
> >
> > Hi,
> >
> > I don't know about the tools you r using but
> generally the error : "Input
> > file contains no relocation info " can be
> eliminated by compling the
> > application with a " r " option. And then use
> the elf2flt tool,
> >
> > To convert the elf into a flat binary.
> >
> >
> >
> > Regards,
> >
> > Kalyan
> >
> >
> > ------------------------------
> >
> > *From:* [EMAIL PROTECTED] [mailto:
> > [EMAIL PROTECTED] *On Behalf Of
> *Roger Feltrin Escanhola
> > *Sent:* Thursday, April 05, 2007 4:18 AM
> > *To:* uclinux-dev@uclinux.org
> > *Subject:* [uClinux-dev] elf2flt
> >
> >
> >
> > I am new in this forum, I've had some troubles to
> run a application in
> > uClinux. My target is a Coldfire microprocessor
> Kit Freescale (M5208EVB). I
> > used Codewarrior to make a simple C program, but
> Codewarrior doesn't
> > generate a binary flat file, so I can't run it on
> uClinux. Instead it makes
> > an elf file when I compile it, so what I trying to
> do is to converter the
> > elf file to flat file.
> >
> > Does any one know how to converter an elf file to
> a flat file?
> >
> > I have m68k-uclinux-tools-20060615.sh installed in
> my host (Fedora Core
> > 5), I tried to converter an elf file using the
> following command:
> >
> > m68k-uclinux-elf2flt o image_out image.elf
> >
> > But it doesn't work and I receive the message
> "image.elf: Input file
> > contains no relocation info"
> >
> > What am I doing wrong in this command?
> >
> > PS: image.elf is a file created when I run the
> "make menuconfig" of a new
> > kernel.
>
=== message truncated ===>
_______________________________________________
> uClinux-dev mailing list
> uClinux-dev@uclinux.org
>
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> This message was resent by uclinux-dev@uclinux.org
> To unsubscribe see:
>
http://mailman.uclinux.org/mailman/options/uclinux-dev
____________________________________________________________________________________
Food fight? Enjoy some healthy debate
in the Yahoo! Answers Food & Drink Q&A.
http://answers.yahoo.com/dir/?link=list&sid=396545367
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
