Hi Zeinab/Greg,
--- Zeinab Zeinalpour wrote:
> Hi Greg,
>
> We use mtd-block(jff2) and the mtd driver does not
> have a reboot notifier
> that puts the flash back into read mode before
> rebooting. We use kernel
> 2.6.17 (snapgear 3.4.0) and instead of ixp425.c
> file, it has ixp4xx.c
> which has no reboot_notifier and
> register/unregister_reboot_notifire. We
> found ixp425_mtd_reboot functio in ixp425.c but the
> function calls from no
> where, so we can't understad how insert this fuction
> to ixp4xx.c correctly.
> Would you please give us some advices?
>
> Regards,
> Zeinab Zeinalpour
>
> On 6/5/07, Greg Ungerer <[EMAIL PROTECTED]> wrote:
> >
> > Hi Zeinab,
> >
> > Zeinab Zeinalpour wrote:
> > > I'm working on ADI Coyote network board using
> snapgear 3.4.0.
> > > When we reboot the board with using reboot
> command, the board reboot but
> > > its redboot isn't load. We chack
> ParityENAccCodelet for find a safe code
> > > for reboot, but it just work on ixp46x. Did
> anyone has the same problem
> > > befor?
> >
> > Do you use the MTD flash driver on that board?
> > Maybe it doesn't put the flash back into read mode
> on reboot.
> >
Greg is snapgear 3.4.0 similar to
uClinux-dist-20060803? uClinux-dist-20060803 has
2.6.17 and I used it on ADI/Coyote and rebooted with
no problem. I use busybox's reboot.
I'm presently using uClinux-dist-20070130 with patches
to pull the kernel up to 2.6.21.5 on ADI/Coyote and
reboot (from busybox) works.
Which reboot is being used; Busybox's or other?
What does the console output look like from a good
startup and a bad reboot?
Regards,
...doug
____________________________________________________________________________________
Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news,
photos & more.
http://mobile.yahoo.com/go?refer=1GNXIC
_______________________________________________
uClinux-dev mailing list
[email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
