Hi Doug,
Doug Kehn wrote:
--- Zeinab Zeinalpour wrote:
We use mtd-block(jff2) and the mtd driver does not
have a reboot notifier
that puts the flash back into read mode before
rebooting. We use kernel
2.6.17 (snapgear 3.4.0) and instead of ixp425.c
file, it has ixp4xx.c
which has no reboot_notifier and
register/unregister_reboot_notifire. We
found ixp425_mtd_reboot functio in ixp425.c but the
function calls from no
where, so we can't understad how insert this fuction
to ixp4xx.c correctly.
Would you please give us some advices?
Regards,
Zeinab Zeinalpour
On 6/5/07, Greg Ungerer <[EMAIL PROTECTED]> wrote:
Hi Zeinab,
Zeinab Zeinalpour wrote:
I'm working on ADI Coyote network board using
snapgear 3.4.0.
When we reboot the board with using reboot
command, the board reboot but
its redboot isn't load. We chack
ParityENAccCodelet for find a safe code
for reboot, but it just work on ixp46x. Did
anyone has the same problem
befor?
Do you use the MTD flash driver on that board?
Maybe it doesn't put the flash back into read mode
on reboot.
Greg is snapgear 3.4.0 similar to
uClinux-dist-20060803?
Yes, it is the same source package.
uClinux-dist-20060803 has
2.6.17 and I used it on ADI/Coyote and rebooted with
no problem. I use busybox's reboot.
I don't recall having any problems rebooting it on the Intel
IXDP425 either.
Regards
Greg
I'm presently using uClinux-dist-20070130 with patches
to pull the kernel up to 2.6.21.5 on ADI/Coyote and
reboot (from busybox) works.
Which reboot is being used; Busybox's or other?
What does the console output look like from a good
startup and a bad reboot?
Regards,
...doug
____________________________________________________________________________________
Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more.
http://mobile.yahoo.com/go?refer=1GNXIC
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
--
------------------------------------------------------------------------
Greg Ungerer -- Chief Software Dude EMAIL: [EMAIL PROTECTED]
Secure Computing Corporation PHONE: +61 7 3435 2888
825 Stanley St, FAX: +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia WEB: http://www.SnapGear.com
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
