[EMAIL PROTECTED] wrote:
Hello,
perhaps you have to patch the makefile. I meen the small-written one.
The makefile configures the configure-skript. I also had problems with compiling
openSSL for netsnmp.
Regards
Michael
Thanks! That actually made the trick.
I removed the line in "makefile" that sets 'no-md4' (it was inside an
if-statement for some reason). Odd setup with a bunch of makefiles, some
generated, some with small letters...
-----Ursprüngliche Nachricht-----
Von: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Auftrag von Joakim Wennergren
Gesendet: Montag, 17. Dezember 2007 16:24
An: uClinux development list
Betreff: [uClinux-dev] OpenSSL problems with snapgear 3.5.0
Hello,
I've been trying to get openssl to work with snapgear (3.5.0).
I've tried openssl 0.9.8e and 0.9.8g without success, I've used the
patches supplied in a previous mail here (from David McCullough and Doug
Kehn resp.).
0.9.8g worked fine, but MD4 wasn't enabled (which I need). I tried to
edit the generated makefiles (since ./Configure didn't work, "no rule to
make target 'links'", and probably shouldn't be used anyway I've heard),
but the linker reported MD4_Init /MD4_Update/MD4_Final missing.
Then I tried 0.9.8e. It refused to compile because of a series of
"undefined reference to `BIO_set_callback'" in the openSSL apps
directory (e.g. enc.c, s_server.c). In 0.9.8e I had to do a "./Configure
linux-elf" since it refused to compile otherwise ("Makefile older than
Makefile.org").
Does anyone have any ideas how to get openssl to work?
Joakim Wennergren
This email was Anti Virus checked by Astaro Security Gateway.
_______________________________________________
uClinux-dev mailing list
[email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
_______________________________________________________________________________________
Diese E-Mail einschließlich ihrer Anhänge ist vertraulich und daher allein für
den Gebrauch durch den vorgesehenen Empfänger bestimmt. Dritten ist das Lesen,
Verteilen oder Weiterleiten dieser E-Mail sowie jedwedes Vertrauen auf deren
Inhalt untersagt. Wir bitten, eine fehlgeleitete E-Mail unverzüglich
vollständig zu löschen und uns eine Nachricht zukommen zu lassen.
This email may contain material that is confidential and/or privileged for the sole use of the intended recipient. Any review, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
WAGO Kontakttechnik GmbH (nach Schweizer Recht) & Co. KG; Rechtsform:
Kommanditgesellschaft; Sitz: Minden; Registergericht: Bad Oeynhausen, HRA 6218;
Persönlich haftender Gesellschafter: WAGO Kontakttechnik Beteiligungs GmbH; Sitz:
Fribourg (Schweiz); Handelsregisteramt CH-217-3533291-9; Geschäftsführung:
Dipl.-Wirtsch. Ing. (FH) Sven Michael Hohorst; Dipl. Betriebsw. Axel Christian
Börner.
_______________________________________________
uClinux-dev mailing list
[email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
This email was Anti Virus checked by Astaro Security Gateway.
This email was Anti Virus checked by Astaro Security Gateway.
_______________________________________________
uClinux-dev mailing list
[email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
