After adding an include file, I 'm now able to compile the kernel with scsi and usb enabled. But still there is no /dev/hdxx generated in the romfs directory!
I've observed that when compile with the same scsi and usb options enabled in make manuconfig for platform 5249, there are some /dev/hdxx generated automatically in romfs directory. But when compile for platform 5280 or 5282 no /dev/hdxx was generated. Could anyone explain these differences? I would think that the /dev/hdxx might solve my problem I have from the beginning. Thanks in advanced Chatsuda ----------------------------------------------------------------------- 2008/1/4, Chatsuda Kalawasoot <[EMAIL PROTECTED]>: > > Thank you Jim and Remco for your reply. > I've tried out your suggestion... > > But make sure the device node is actually there in /dev (and that > So I manually added device node to the romfs by these commands > $ touch @sdb,b,8,0 > $ touch @sdb1,b,8,1 > > When downloading to the target and run both commands > /> mount -t msdos /dev/sdb1 /var/tmp > /> mount -t vfat /dev/sdb1 /var/tmp > > mount failed: No such device or address > > After some more search it seems that I've to enable SCSI in 'make > menuconfig' to have sdxx in my /dev, which I did. And now I'am stuck > with a bunch of compile errors in scsi_lib.c: error: invalid use of > undefined type 'struct scatterlist' > > Are there something more I've to enable from 'make menuconfig'? > > Thanks in advanced > Chatsuda > > > -------------------------------------------------------------------------------- > 2007/12/27, Chatsuda Kalawasoot <[EMAIL PROTECTED]>: > > > > Hi, > > I'm struggle with mounting CF-card on M5280 board for some times now, > > here is what I've done: > > I enabling > > ATA/IDE/MFM/RLL Support > > and under > > IDE, ATA and ATAPI Block devices > > I enabling Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support > > and enable > > Include IDE/ATA-2 DISK support > > > > When downloaded to the target and run > > /> mount -t msdos /dev/hda1 /var/tmp > > mount failed: No such file or directory > > > > Under directory ...romfs/etc i have these files: > > > > drwxr-xr-x 2 test test 4096 2007-12-21 15:50 config > > drwxr-xr-x 2 test test 4096 2007-12-21 13:40 default > > -rw-r--r-- 1 test test 176 2007-12-21 15:50 inetd.conf > > -rw-r--r-- 1 test test 45 2007-12-21 15:50 inittab > > -rw-r--r-- 1 test test 296 2001-07-26 08:14 motd > > -rw-r--r-- 1 test test 42 2007-12-21 14:35 passwd > > -rw-r--r-- 1 test test 2874 2007-12-21 15:50 ramfs.img > > -rw-r--r-- 1 test test 288 2007-12-21 15:50 rc > > -rw-r--r-- 1 test test 8205 2001-09-23 23:23 services > > -rw-r--r-- 1 test test 64 2007-12-21 15:50 version > > > > Attached is the output before mounting > > > > Any further suggestions? > > Thanks in advance > > Chatsuda > > > > > > >
_______________________________________________ uClinux-dev mailing list [email protected] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [email protected] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
