Thank you Jate, it was useful hint! But my problems are not solved yet. It turns out that the cf-card is connected in a memory mapped mode and not in true IDE mode as I first thought. I have seen some thread about this problem telling about modify a driver in ide, but I could not find that file. Has someone managed to have access to the cf-card conected in memory mapped mode in this current 2.4.32distribution and can guide me in the right direction? Right now I have no ide how much work needs to be done for making it work or where to begin.
Thanks in advanced Chatsuda 2008/1/7, Jate Sujjavanich <[EMAIL PROTECTED]>: > > Go to uClinux-dist/vendors/Motorola/*/Makefile (substituting you vendor > and board) and edit the DEVICES section. That's where you add new devices. > > - Jate > > ------------------------------ > *From:* [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] *On Behalf Of *Chatsuda Kalawasoot > *Sent:* Sunday, January 06, 2008 3:47 PM > *To:* [email protected] > *Subject:* [uClinux-dev] Re: Trouble mounting CF-card on M5280 board > > After adding an include file, I 'm now able to compile the kernel with > scsi and usb enabled. But still there is no /dev/hdxx generated in the romfs > directory! > > I've observed that when compile with the same scsi and usb options enabled > in make manuconfig for platform 5249, there are some /dev/hdxx generated > automatically in romfs directory. But when compile for platform 5280 or 5282 > no /dev/hdxx was generated. Could anyone explain these differences? > > I would think that the /dev/hdxx might solve my problem I have from the > beginning. > > Thanks in advanced > Chatsuda > > > ----------------------------------------------------------------------- > 2008/1/4, Chatsuda Kalawasoot <[EMAIL PROTECTED]>: > > > > Thank you Jim and Remco for your reply. > > I've tried out your suggestion... > > > But make sure the device node is actually there in /dev (and that > > So I manually added device node to the romfs by these commands > > $ touch @sdb,b,8,0 > > $ touch @sdb1,b,8,1 > > > > When downloading to the target and run both commands > > /> mount -t msdos /dev/sdb1 /var/tmp > > /> mount -t vfat /dev/sdb1 /var/tmp > > > mount failed: No such device or address > > > > After some more search it seems that I've to enable SCSI in 'make > > menuconfig' to have sdxx in my /dev, which I did. And now I'am stuck > > with a bunch of compile errors in scsi_lib.c: error: invalid use of > > undefined type 'struct scatterlist' > > > > Are there something more I've to enable from 'make menuconfig'? > > > > Thanks in advanced > > Chatsuda > > > > > > -------------------------------------------------------------------------------- > > 2007/12/27, Chatsuda Kalawasoot <[EMAIL PROTECTED]>: > > > > > > Hi, > > > I'm struggle with mounting CF-card on M5280 board for some times now, > > > here is what I've done: > > > I enabling > > > ATA/IDE/MFM/RLL Support > > > and under > > > IDE, ATA and ATAPI Block devices > > > I enabling Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support > > > and enable > > > Include IDE/ATA-2 DISK support > > > > > > When downloaded to the target and run > > > /> mount -t msdos /dev/hda1 /var/tmp > > > mount failed: No such file or directory > > > > > > Under directory ...romfs/etc i have these files: > > > > > > drwxr-xr-x 2 test test 4096 2007-12-21 15:50 config > > > drwxr-xr-x 2 test test 4096 2007-12-21 13:40 default > > > -rw-r--r-- 1 test test 176 2007-12-21 15:50 inetd.conf > > > -rw-r--r-- 1 test test 45 2007-12-21 15:50 inittab > > > -rw-r--r-- 1 test test 296 2001-07-26 08:14 motd > > > -rw-r--r-- 1 test test 42 2007-12-21 14:35 passwd > > > -rw-r--r-- 1 test test 2874 2007-12-21 15:50 ramfs.img > > > -rw-r--r-- 1 test test 288 2007-12-21 15:50 rc > > > -rw-r--r-- 1 test test 8205 2001-09-23 23:23 services > > > -rw-r--r-- 1 test test 64 2007-12-21 15:50 version > > > > > > Attached is the output before mounting > > > > > > Any further suggestions? > > > Thanks in advance > > > Chatsuda > > > > > > > > > > > > > > > > > ************************************************************************************ > This footnote confirms that this email message has been scanned by > PineApp Mail-SeCure for the presence of malicious code, vandals & computer > viruses. > > ************************************************************************************ > > > > _______________________________________________ > uClinux-dev mailing list > [email protected] > http://mailman.uclinux.org/mailman/listinfo/uclinux-dev > This message was resent by [email protected] > To unsubscribe see: > http://mailman.uclinux.org/mailman/options/uclinux-dev >
_______________________________________________ uClinux-dev mailing list [email protected] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [email protected] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
