Hi Marcio, I am using the smdk2500 because I found it in an old-stuff-closet and I am trying to rescue it :) Probably this is the source of my problems... ;) So I dont have the CD nor the cables that probably came if the kit.
Do you know were can I found the CD with uClinux? I had tried rs232 and usb, but nothing... now I will try the ethernet TFTP. Thanks a lot, Mauro 2008/2/26, Marcio Lima <[EMAIL PROTECTED]>: > > Hi > > The smdk2500 development board has a CD with uClinux and all the tools. > > You can use the JTAG but the board has a boot that allows you to download > code from ethernet TFTP. > > The processor is already EOL. So, you should look to another > borad/processor. > > Regards > > Marcio > > > > > Tue, 26 Feb 2008 15:16:11 -0300, "Mauro Muñoz" escreveu: > > Hi all, > > I found a Samsung smdk2500 devel board and I'm trying to install uClinux > on it. > > Does anyone know if uClinux is compativel with it? If so, what > vendor/product should I use? > I saw no Samsung vendor and no ARM product (except for GDB/ARMulator) when > trying "make xconfig". > I know the smdk2500 board has a Samsung ARM S3C2500B01 uC. > > Another question: does anyone know how do I send a program to the board? > I need to do this through JTAG or can I use serial port? Do I need a > special (or commercial) > software or can I use an opensource one? > > Sorry for my basic questions. > As you all can see I am new with embedded linux. > > Thanks in advance, > Mauro > > > _______________________________________________ > uClinux-dev mailing list > [email protected] > http://mailman.uclinux.org/mailman/listinfo/uclinux-dev > This message was resent by [email protected] > To unsubscribe see: > http://mailman.uclinux.org/mailman/options/uclinux-dev > -- Mauro E S Muñoz
_______________________________________________ uClinux-dev mailing list [email protected] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [email protected] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
