Hi
I am using uclinux for MCF5329EVB board.
I want to have ppp package added to my system.
I am using ltib for configuarion. I am using toolchain gcc-4.2
First I added ppp support(ppp over async. Serial port) in the kernel 
configuration.

It compiled successfully.

Then I added the ppp package in the packages list.

But it was giving liker error as mentioned below.

gcc -o minconn.so -shared -O2 -g -I.. -I../../include -fPIC minconn.c

/home/abhisek/uclinux/LTIB/ltib-m532xevb-20071102/rootfs/usr/lib//crt1.o: In 
function `_start':

libc/sysdeps/linux/m68k/crt1.S:(.text+0x1c): undefined reference to `main'

/tmp/cc4dlaCR.o: In function `my_get_idle':

/home/abhisek/uclinux/LTIB/ltib-m532xevb-20071102/rpm/BUILD/ppp-2.4.4/pppd/plugins/minconn.c:58:
 undefined reference to `idle_time_limit'

/home/abhisek/uclinux/LTIB/ltib-m532xevb-20071102/rpm/BUILD/ppp-2.4.4/pppd/plugins/minconn.c:54:
 undefined reference to `idle_time_limit'

/tmp/cc4dlaCR.o: In function `plugin_init':

/home/abhisek/uclinux/LTIB/ltib-m532xevb-20071102/rpm/BUILD/ppp-2.4.4/pppd/plugins/minconn.c:63:
 undefined reference to `info'

/home/abhisek/uclinux/LTIB/ltib-m532xevb-20071102/rpm/BUILD/ppp-2.4.4/pppd/plugins/minconn.c:64:
 undefined reference to `add_options'

/home/abhisek/uclinux/LTIB/ltib-m532xevb-20071102/rpm/BUILD/ppp-2.4.4/pppd/plugins/minconn.c:65:
 undefined reference to `idle_time_hook'

collect2: ld returned 1 exit status

make[1]: *** [minconn.so] Error 1

make[1]: Leaving directory 
`/home/abhisek/uclinux/LTIB/ltib-m532xevb-20071102/rpm/BUILD/ppp-2.4.4/pppd/plugins'

make: *** [all] Error 2

error: Bad exit status from 
/home/abhisek/uclinux/LTIB/ltib-m532xevb-20071102/tmp/rpm-tmp.39947 (%build)
 
suggestions would be greatly appreciated.

Regards
Sankar

**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely 
for the use of the addressee(s). If you are not the intended recipient, please 
notify the sender by e-mail and delete the original message. Further, you are 
not 
to copy, disclose, or distribute this e-mail or its contents to any other 
person and 
any such actions are unlawful. This e-mail may contain viruses. Infosys has 
taken 
every reasonable precaution to minimize this risk, but is not liable for any 
damage 
you may sustain as a result of any virus in this e-mail. You should carry out 
your 
own virus checks before opening the e-mail or attachment. Infosys reserves the 
right to monitor and review the content of all messages sent to or from this 
e-mail 
address. Messages sent to or from this e-mail address may be stored on the 
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
_______________________________________________
uClinux-dev mailing list
[email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev

Reply via email to