Hi Philippe,
Philippe De Muyter wrote:
Hello Timothée,
On Tue, Aug 25, 2009 at 05:47:59PM +0200, Timothée Manaud wrote:
Can you make sure the serial terminal is enabled and the port speed is
fine? As the D-Bug default is 19200.
Device Drivers
Character devices
Serial drivers
Coldfire serial support (new style driver)
Default baudrate for Coldfire serial ports: 19200
Yes. Except is not called anymore '(new style driver)'
Problem seems to be more fundamental : the offset of the UARTs (called
PSCs on MCF547x/MCF548x) in the SIU are wrong, the interrupt controller
is different, and maybe more :(
I only ever coded support into the older 2.4.x kernel (this was _quite_
a few years ago). As far as I know none of that was carried forward
to 2.6.x kernels, so I would say there is zero chance it will work on
any modern 2.6.
Regards
Greg
------------------------------------------------------------------------
Greg Ungerer -- Principal Engineer EMAIL: [email protected]
SnapGear Group, McAfee PHONE: +61 7 3435 2888
825 Stanley St, FAX: +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia WEB: http://www.SnapGear.com
_______________________________________________
uClinux-dev mailing list
[email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
