On Monday 20 August 2007 16:43, Paul Rolland wrote: > Hello, > > I'm trying to have at the same time two USB DSL modem using Ikanos chipset > (eagleIV firmware). > Unfortunately, soemthing goes wrong in the init process, and the log says : > > bash-2.05# modprobe ueagle_atm > 14:03:16.747882 crash-me kernel: [ueagle-atm] driver ueagle-svn $Id: > ueagle-atm.c 356 2007-08-18 08:54:51Z swg $ loaded > 14:03:16.748582 crash-me kernel: usb 2-2: [ueagle-atm] ADSL device founded > vid (0X1110) pid (0X9041) Rev (0X3029): Eagle IV > bash-2.05# 14:03:16.857252 crash-me kernel: usb 2-2: reset full speed USB > device using uhci_hcd and address 5 > 14:03:17.045199 crash-me kernel: usb 2-2: [ueagle-atm] using iso mode > 14:03:17.045998 crash-me kernel: usb 2-2: [ueagle-atm] (re)booting started > 14:03:17.052082 crash-me kernel: usb 2-1: [ueagle-atm] ADSL device founded > vid (0X1110) pid (0X9041) Rev (0X3029): Eagle IV > 14:03:17.065006 crash-me kernel: printk: 2954 messages suppressed. > 14:03:17.161196 crash-me kernel: usb 2-1: reset full speed USB device using > uhci_hcd and address 7 > 14:03:17.337234 crash-me kernel: usb 2-1: [ueagle-atm] using iso mode > 14:03:17.338402 crash-me kernel: usb 2-1: [UEAGLE-ATM] urb submition failed > with error -28 > 14:03:17.338999 crash-me kernel: ueagle-atm 2-1:1.0: usbatm_usb_probe: bind > failed: -12! > 14:03:17.339599 crash-me kernel: ueagle-atm: probe of 2-1:1.0 failed with > error -12 > 14:03:17.340167 crash-me kernel: usbcore: registered new interface driver > ueagle-atm > 14:03:18.063766 crash-me kernel: printk: 995 messages suppressed. > 14:03:18.169318 crash-me kernel: usb 2-2: [ueagle-atm] sending DSP page 0 > 14:03:18.423799 crash-me kernel: usb 2-2: [ueagle-atm] ATU-R firmware version > : a10050b > 14:03:18.445698 crash-me kernel: usb 2-2: [ueagle-atm] sending DSP page 3 > 14:03:18.481663 crash-me kernel: usb 2-2: [ueagle-atm] sending DSP page 4 > 14:03:18.500658 crash-me kernel: usb 2-2: [ueagle-atm] Modem started, waiting > synchronization > > What's causing me problem is the "urb submition failed with error -28" for > usb 2-1. > Error -28 is ENOSPC, and I can't find what's causing this... > > Any clue to help me search ? Look's there is no bandwidth on your usb bus. Does "altsetting=0" ueagle-atm module option works for you?
-- Cheers Stanislaw Gruszka _______________________________________________ Ueagleatm-dev mailing list Ueagleatm-dev@gna.org https://mail.gna.org/listinfo/ueagleatm-dev
