Hi Stanislaw, On Mon, 20 Aug 2007 17:29:21 +0200 Stanislaw Gruszka <[EMAIL PROTECTED]> wrote:
> On Monday 20 August 2007 17:12, Stanislaw Gruszka wrote: > > On Monday 20 August 2007 16:43, Paul Rolland wrote: > > > Hello, > > > > > > I'm trying to have at the same time two USB DSL modem using Ikanos > > > chipset (eagleIV firmware). > I miss word "two" before. Will you really use two modems with different > telephone lines ? Could you tell something more your ADSL configuration? > If you want to use different module options to each modem you need to > change NB_MODEM constant, I have changed it to 1 by default. Yes, I will... Not at the same time (hmmm.... well... why not ? ;). In fact, the machine will have two modems with two phone lines, at different speeds, and the configuration is used to test that these are working correctly, without having to use multiples machines. I used to do that before with kernel 2.4 and eagle-usb driver, with 9031/9032 Sagem modems, but this driver doesn't support eagleIV firmware, thus I need to upgrade to kernel 2.6, ueagle driver, and so new problems... Using NB_MODEM set to 2, I still have : 15:40:33.497795 crash-me kernel: usb 2-1: [ueagle-atm] using iso mode 15:40:33.499021 crash-me kernel: usb 2-1: [UEAGLE-ATM] urb submition failed with error -28 15:40:33.499769 crash-me kernel: ueagle-atm 2-1:1.0: usbatm_usb_probe: bind failed: -12! Adding altsetting=0 is much better, though there are still urb submission errors : bash-2.05# insmod ueagle-atm.ko altsetting=0 bash-2.05# 15:43:18.454682 crash-me kernel: [ueagle-atm] driver ueagle-svn $Id: ueagle-atm.c 356 2007-08-18 08:54:51Z swg $ loaded 15:43:18.458957 crash-me kernel: usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9041) Rev (0X3029): Eagle IV 15:43:18.569224 crash-me kernel: usb 2-2: reset full speed USB device using uhci_hcd and address 5 15:43:18.751303 crash-me kernel: usb 2-2: [ueagle-atm] (re)booting started 15:43:18.756099 crash-me kernel: usb 2-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9041) Rev (0X3029): Eagle IV 15:43:18.865246 crash-me kernel: usb 2-1: reset full speed USB device using uhci_hcd and address 7 15:43:19.043158 crash-me kernel: usb 2-1: [ueagle-atm] using iso mode 15:43:19.043922 crash-me kernel: usb 2-1: [ueagle-atm] (re)booting started 15:43:19.050084 crash-me kernel: printk: 386 messages suppressed. 15:43:19.050990 crash-me kernel: ATM dev 1: usbatm_submit_urb: urb 0xcf3655c0 submission failed (-28)! 15:43:19.051636 crash-me kernel: ATM dev 1: usbatm_submit_urb: urb 0xcf3652c0 submission failed (-28)! 15:43:19.052233 crash-me kernel: ATM dev 1: usbatm_submit_urb: urb 0xcf365440 submission failed (-28)! 15:43:19.052797 crash-me kernel: ATM dev 1: usbatm_submit_urb: urb 0xcf365380 submission failed (-28)! 15:43:19.053364 crash-me kernel: usbcore: registered new interface driver ueagle-atm 15:43:19.149345 crash-me kernel: ATM dev 1: usbatm_submit_urb: urb 0xcf365380 submission failed (-28)! 15:43:19.873315 crash-me kernel: usb 2-2: [ueagle-atm] sending DSP page 0 15:43:20.119791 crash-me kernel: usb 2-2: [ueagle-atm] ATU-R firmware version : a10050b 15:43:20.142692 crash-me kernel: usb 2-2: [ueagle-atm] sending DSP page 3 15:43:20.165331 crash-me kernel: usb 2-1: [ueagle-atm] sending DSP page 0 15:43:20.179764 crash-me kernel: usb 2-2: [ueagle-atm] sending DSP page 4 15:43:20.200428 crash-me kernel: usb 2-2: [ueagle-atm] Modem started, waiting synchronization 15:43:20.413736 crash-me kernel: usb 2-1: [ueagle-atm] ATU-R firmware version : a10050b 15:43:20.435636 crash-me kernel: usb 2-1: [ueagle-atm] sending DSP page 3 15:43:20.472604 crash-me kernel: usb 2-1: [ueagle-atm] sending DSP page 4 15:43:20.491597 crash-me kernel: usb 2-1: [ueagle-atm] Modem started, waiting synchronization 15:43:24.049241 crash-me kernel: printk: 190 messages suppressed. 16:43:29.049237 crash-me kernel: printk: 199 messages suppressed. Regards, Paul _______________________________________________ Ueagleatm-dev mailing list Ueagleatm-dev@gna.org https://mail.gna.org/listinfo/ueagleatm-dev
