Hi Dan, We are using LDP and that looks like it will solve my problem.
Will enabling this cause any network outage? Best regards, Paul -----Original Message----- From: Dan Peachey [mailto:[email protected]] Sent: 28 April 2016 14:44 To: Paul Bone <[email protected]> Cc: [email protected] Subject: Re: [uknof] Juniper SRX as PE Node Problem On 28 April 2016 at 10:31, Paul Bone <[email protected]> wrote: > > I am using some Juniper SRX240 as PE nodes and running the Internet in VRF. > > > > I have two Juniper MX5 MP-BGP route reflectors which also receive the full > internet table plus default into VRF and export just my local routes (BGP and > direct) and a default route (BGP) into the VRF. > > > > The problem I have is that the SRX240 is receiving the default route from > both route reflectors but is actually preferring and forwarding traffic to > the route reflector with the lowest router ID (show route detail confirms > this) and ignoring the underlying IGP metrics from the global OSPF table. > > > > This is causing sub-optimal routing of traffic. > > > > Has anyone experienced this before? > > > > Best regards, Paul > > Hi Paul, Are you using LDP? If so, make sure you have 'track-igp-metric' set under 'protocols ldp'. Cheers, Dan
