Hi, I am using the latest version of unattended, 4.9. My machine has a broadcom NIC which uses the bnx2 module. When I pxe boot into unattended it runs fine until it tries to load the bnx2 module, at which point it fails like so
*** Next, we'll look for PCI Ethernet hardware... Looking for PCI devices of class 0x020000 (mask 0xFFFF00) 01:00.0 0200: 14e4:163b (rev 20) 01:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20) 01:00.1 0200: 14e4:163b (rev 20) 01:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20) Looking for PCI devices of class 0x068000 (mask 0xFFFF00) Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009) bnx2 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 28 bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw bnx2: Can't load firmware file "bnx2/bnx2-mips-09-5.0.0.j3.fw" bnx2: probe of 0000:01:00.0 failed with error -2 bnx2 0000:01:00.1: PCI->APIC IRQ transform: INT B -> IRQ 40 bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw bnx2: Can't load firmware file "bnx2/bnx2-mips-09-5.0.0.j3.fw" bnx2: probe of 0000:01:00.1 failed with error -2 I am not sure where exactly it is looking for the firmware, it seems to be looking at a relative path of bnx2/bnx2-mips-09-5.0.0.j3.fw. I extracted the initrd and looked at /lib/firmware/bnx2 and the firmware is there. I tried to symlink that location to /bnx2 but that didn't help either. Does anyone know how to get this to work? ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
