I went through that and added bnx2/bnx2-mips-09-5.0.0.j3.fw to External firmware blobs to build into the kernel binary, as you suggested. Then I ran 'make' and got the following error.
... ... MK_FW firmware/bnx2/bnx2-mips-09-5.0.0.j3.fw.gen.S make[1]: *** No rule to make target `firmware/bnx2/bnx2-mips-09-5.0.0.j3.fw', needed by `firmware/bnx2/bnx2-mips-09-5.0.0.j3.fw.gen.o'. Stop. make: *** [firmware] Error 2 I am not what to make of this. On Tue, Sep 14, 2010 at 10:02 AM, Juanjo Pablos <jua...@apertus.es> wrote: > El 14/09/10 18:11, melbogia escribió: >> >> Hi, >> I am using the latest version of unattended, 4.9. My machine has a >> broadcom NIC which uses the bnx2 module. When I pxe boot into >> unattended it runs fine until it tries to load the bnx2 module, at >> which point it fails like so >> >> *** Next, we'll look for PCI Ethernet hardware... >> Looking for PCI devices of class 0x020000 (mask 0xFFFF00) >> 01:00.0 0200: 14e4:163b (rev 20) >> 01:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 >> Gigabit Ethernet (rev 20) >> 01:00.1 0200: 14e4:163b (rev 20) >> 01:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 >> Gigabit Ethernet (rev 20) >> Looking for PCI devices of class 0x068000 (mask 0xFFFF00) >> Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009) >> >> bnx2 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 28 >> bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw >> bnx2: Can't load firmware file "bnx2/bnx2-mips-09-5.0.0.j3.fw" >> bnx2: probe of 0000:01:00.0 failed with error -2 >> bnx2 0000:01:00.1: PCI->APIC IRQ transform: INT B -> IRQ 40 >> bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw >> bnx2: Can't load firmware file "bnx2/bnx2-mips-09-5.0.0.j3.fw" >> bnx2: probe of 0000:01:00.1 failed with error -2 >> >> >> I am not sure where exactly it is looking for the firmware, it seems >> to be looking at a relative path of bnx2/bnx2-mips-09-5.0.0.j3.fw. I >> extracted the initrd and looked at /lib/firmware/bnx2 and the firmware >> is there. I tried to symlink that location to /bnx2 but that didn't >> help either. Does anyone know how to get this to work? >> > > Build the linuxboot from source. > > https://sourceforge.net/apps/trac/unattended/wiki/ModifyingTheBootDisk > > Then on linuxboot/linux type make menuconfig > > go to Device Drives > Generic Driver Options > External firmware blobs to > build into the kernel > And add > > bnx2/bnx2-mips-09-5.0.0.j3.fw > > > ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info