Thanks,
I'm working on having a pro come out and spray from the rub rail up.I've decided to repaint the stripe on the hull only. Greg --- On Fri, 3/27/09, waterguy <[email protected]> wrote: > From: waterguy <[email protected]> > Subject: [UnifliteWorld] Re: Painting My 36' > To: "UnifliteWorld" <[email protected]> > Date: Friday, March 27, 2009, 2:30 AM > > I probably should have said that painting (brush or roller) > with a > multi-part paint doesn't raise the issues that spraying > does, and I've > seen some work that defies guessing whether it was rolled > or sprayed. > It's a matter of surface prep and care. > > As to the Brightside product, your best source for answers > is the > material safety data sheet (MSDS) published by the > manufacturer. This > page has links to the MSDSs for the different colors: > http://www.jamestowndistributors.com/userportal/show_product.do?pid=64 > I checked a couple which said to use a respirator designed > for the > hazardous materials in section 2 of the MSDS, which were > napthalene, > xylenes, amorphous silica, kerosene, Stoddard solvent, > medium > aliphatic naptha solvent (petroleum), and some other > stuff. Compare > the list on the respirator cartridge to the list on the > MSDS to > determine which cartridge to use. > > If you're using a 3M respirator, and they make one of the > best, > there's an 800 number listed on the MSDS to call 3M to get > a > recommendation for the right cartidge. > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/UnifliteWorld?hl=en -~----------~----~----~----~------~----~------~--~---
