i dont think original...i have "new" 350's with hurth ZF 2:1 trans, 1 1/4 shafts (original) and 18x20 lite cup nibral props
WOT is 4700 medium light load, 48gph +/- and 23knots...i didnt set this up but i do like it On Apr 14, 2:01 pm, Rich Zimmerman <[email protected]> wrote: > I also have a 34 Conv 73 with 350's but my props are 15 x 15 with 1 1/4 > shafts. Do you know if the props are original? What speed fuel and RPM's > use do you get at WOT? > > Thanks > > Rich Zimmerman > > Commitment 34 > --- On Tue, 4/14/09, HBH <[email protected]> wrote: > From: HBH <[email protected]> > Subject: [UnifliteWorld] Re: gas > To: "UnifliteWorld" <[email protected]> > Date: Tuesday, April 14, 2009, 3:32 PM > > just slightly above a plane, 18x20 props with light cup > > On Apr 14, 5:52 am, Rich Zimmerman <[email protected]> wrote: > > > Is the boat on plane at 2300rpms? What props do you have? Are they > cupped? > > > Thanks > > > Rich Zimmerman > > > --- On Sun, 4/12/09, HBH <[email protected]> wrote: > > From: HBH <[email protected]> > > Subject: [UnifliteWorld] Re: gas > > To: "UnifliteWorld" <[email protected]> > > Date: Sunday, April 12, 2009, 10:02 PM > > > i have a 34 conv with twin 350's and flowscan...you should get 2mpg > > at low speed BUT it will take twice as many hours to get to your > > destination thus putting 2x the hours on your engines also...i have > > found the sweet spot to be at about 2300rpms/12knts avg/1.5mpg avg --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/UnifliteWorld?hl=en -~----------~----~----~----~------~----~------~--~---
