Thanks for sharing all your knowledge! On Aug 31, 10:51 am, waterguy <[email protected]> wrote: > Chris: former answers are totally correct, you should look for > valves. These will be in the fuel lines somewhere in your engine > compartment. They're ball valves, and have a handle about 4 inches > long on them. When the handle is in line with the direction of the > fuel line, the valve is open. When turned 90 degrees so the handle is > across the line, the valve is closed. One valve for each tank, plus a > crossover valve that blocks the engines from drawing from both tanks. > I agree with hmatthie, keep the crossover closed and both tank valves > open and run each engine from its own tank - unless you run one tank > dry, then close the valve for that tank, open the crossover and draw > from the other tank. Good luck!
-- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en.
