Hi to all you Uniflite experts, OK so I have extra hull fitting from the macerator pump up to the deck. Do you have one?
What is it used for? Do I keep it? My current Jabsco 12V Macerator Pump is burnt out and not pumping out. I'm being told that they burn out. It runs and spins but does not pump out. Matter of fact if I leave the thing with the Through Hull open it will fill my holding tank with sea water! Not Good. Or do you just change the impeller? I was thinking of taking out the several "T" fittings and putting in "Y" fittings and am now told by my boat mechanic that Y valves are not dependable long term and lose proper seal after a while. Not good for at or below the water line. And he wants to take out the option of going up to the second smaller pump out point with the Effluent under pressure from the macerator pump. So the topic of redesigning the plumbing off the holding tank is now on the top of the Fix-It list. Would appreciate your inputs or photos of the right ways to solve this problem. -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en.
