Very good points. I now have a 2 speed switch in the dash to accommodate the 2 speed feature of the wiper.
On Aug 11, 11:06 am, waterguy <[email protected]> wrote: > Just a couple of things: Verify the length of the motor shaft before > you buy. I bought a replacement motor at a swap meet (new in box - > I'm not THAT dumb), but found out that the motor shaft stuck out about > 2 inches above the surface of the cabin. Ooops. > > Also, one thing about the self-parking motors is that they may use a 3- > wire connection (or 4 wire, if it's a two-speed motor): Positive (1 > lead for each speed) for motor drive, negative ground, and a positive > feed for the parking circuit. My wipers are switched at the helm > through the circuit breaker. If yours are the same and you want the > self-parking feature and the multi speeds, you'll have to buy a > separate switch. Install it downstream of the circuit breaker, > please. Those switches are available on eBay at $45 for a lot of 5. > Link here: > http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=3802476... -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en.
