Bob that looks fantastic! Well done. Want to come do my boat for me? ;-) Kerry
On May 2, 2014, at 9:02 AM, Bob S <[email protected]> wrote: > Ron, > I used an engineered flooring for the galley forward. I ended up using a > product called Mirage which was pretty expensive but had a bulletproof > factory finish. > I've decided on carpet for the salon due to the hatches and the fact that I > am removing them quite often. They are so heavy for me to hoist I was afraid > I would damage the flooring. > Here is a picture of the flooring. As you can see I decided to rebuild the > table out of the same material. > > > On Fri, May 2, 2014 at 5:20 AM, ron hammill <[email protected]> wrote: > I just replaced the carpet in the salon with Brazilian Teak three quarter > inchprefinished. cost was $500. did the work myself needed a nail gun took > 2days. hardest part was cuttingin the hatches 4 finishedproduct beautiful. > > To: [email protected] > From: [email protected] > Subject: [UnifliteWorld] Abridged summary of [email protected] - > 1 update in 1 topic > Date: Fri, 2 May 2014 03:02:59 +0000 > > Today's topic summary > Group: http://groups.google.com/group/unifliteworld/topics > Re-carpeting? [1 Update] > Re-carpeting? > Bob S <[email protected]> May 01 04:55PM -0700 > > Yike, I priced the binding and It would cost around $300 just for the 2 > engine hatches (since some of the work would have to be done by hand). I > think I will go with a cut edge and a throw rug in ...more > Back to top > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/unifliteworld. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/unifliteworld. > For more options, visit https://groups.google.com/d/optout. > > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/unifliteworld. > For more options, visit https://groups.google.com/d/optout. > <New Dinette table.JPG><Galley Hall.JPG> -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/unifliteworld. For more options, visit https://groups.google.com/d/optout.
