Hah! Thanks. I won't be one of those guys who says it was easy. There wasn't a straight cut anywhere and with the cut off saw on the back deck I must have made 1,000 trips from knees to saw and back. I'm betting the carpet job will be easier.
But now its done I am pretty happy with the result. On Fri, May 2, 2014 at 9:20 AM, Kerry Lebel <[email protected]> wrote: > Bob that looks fantastic! Well done. Want to come do my boat for me? ;-) > > Kerry > > > On May 2, 2014, at 9:02 AM, Bob S <[email protected]> wrote: > > Ron, > I used an engineered flooring for the galley forward. I ended up using a > product called Mirage which was pretty expensive but had a bulletproof > factory finish. > I've decided on carpet for the salon due to the hatches and the fact that > I am removing them quite often. They are so heavy for me to hoist I was > afraid I would damage the flooring. > Here is a picture of the flooring. As you can see I decided to rebuild the > table out of the same material. > > > On Fri, May 2, 2014 at 5:20 AM, ron hammill <[email protected]>wrote: > >> I just replaced the carpet in the salon with Brazilian Teak three quarter >> inchprefinished. cost was $500. did the work myself needed a nail gun >> took 2days. hardest part was cuttingin the hatches 4 finishedproduct >> beautiful. >> >> ------------------------------ >> To: [email protected] >> From: [email protected] >> Subject: [UnifliteWorld] Abridged summary of >> [email protected] - 1 update in 1 topic >> Date: Fri, 2 May 2014 03:02:59 +0000 >> >> Today's topic summary >> Group: http://groups.google.com/group/unifliteworld/topics >> >> - Re-carpeting? [1 Update] >> >> >> Re-carpeting?<http://groups.google.com/group/unifliteworld/t/aa1889e9d08c472f> >> >> Bob S <[email protected]> May 01 04:55PM -0700 >> >> Yike, I priced the binding and It would cost around $300 just for the >> 2 >> engine hatches (since some of the work would have to be done by >> hand). I >> think I will go with a cut edge and a throw rug in >> ...more<http://groups.google.com/group/unifliteworld/msg/abbd6e342640fea5> >> Back to top >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "UnifliteWorld" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/unifliteworld. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "UnifliteWorld" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/unifliteworld. >> For more options, visit https://groups.google.com/d/optout. >> > > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/unifliteworld. > For more options, visit https://groups.google.com/d/optout. > <New Dinette table.JPG><Galley Hall.JPG> > > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/unifliteworld. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/unifliteworld. For more options, visit https://groups.google.com/d/optout.
