petercal wrote: > Hello all, > > I've installed Squeezelite on Raspberry Pi and everything works fine via > RPI audio out jack. > To get a better sound i installed a USB soundboard, but i can't figure > out how to get Squeezelite > to send the output to the USB Sound board. > > > I have the USB Card on card 1 > > root@raspberrypi:~# aplay -l > **** List of PLAYBACK Hardware Devices **** > card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA] > Subdevices: 7/8 > Subdevice #0: subdevice #0 > Subdevice #1: subdevice #1 > Subdevice #2: subdevice #2 > Subdevice #3: subdevice #3 > Subdevice #4: subdevice #4 > Subdevice #5: subdevice #5 > Subdevice #6: subdevice #6 > Subdevice #7: subdevice #7 > card 1: Device [Generic USB Audio Device], device 0: USB Audio [USB > Audio] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > > root@raspberrypi:~# aplay -L > null > Discard all samples (playback) or generate zero samples (capture) > pulse > PulseAudio Sound Server > sysdefault:CARD=ALSA > bcm2835 ALSA, bcm2835 ALSA > Default Audio Device > sysdefault:CARD=Device > Generic USB Audio Device, USB Audio > Default Audio Device > front:CARD=Device,DEV=0 > Generic USB Audio Device, USB Audio > Front speakers > surround40:CARD=Device,DEV=0 > Generic USB Audio Device, USB Audio > 4.0 Surround output to Front and Rear speakers > surround41:CARD=Device,DEV=0 > Generic USB Audio Device, USB Audio > 4.1 Surround output to Front, Rear and Subwoofer speakers > surround50:CARD=Device,DEV=0 > Generic USB Audio Device, USB Audio > 5.0 Surround output to Front, Center and Rear speakers > surround51:CARD=Device,DEV=0 > Generic USB Audio Device, USB Audio > 5.1 Surround output to Front, Center, Rear and Subwoofer speakers > surround71:CARD=Device,DEV=0 > Generic USB Audio Device, USB Audio > 7.1 Surround output to Front, Center, Side, Rear and Woofer > speakers > iec958:CARD=Device,DEV=0 > Generic USB Audio Device, USB Audio > IEC958 (S/PDIF) Digital Audio Output > > > BR, > Peter
try squeezelite -l to find the names of the output devices I suspect "./squeezelite -o hw:CARD=Device,DEV=0" will work, but its strange naming of the usb device... ------------------------------------------------------------------------ Triode's Profile: http://forums.slimdevices.com/member.php?userid=17 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
