Squeezed_Rotel wrote: > After much testing, I observe that once the MyTek usb2 firmware does > load, it's the mytek power down that causes the firmware on the wand to > "unload". I can always get it back by one or two rmmod/modprobe. The > other issue is that the Wand won't play anything over 44.1 natively.
John, It's not that the firmware on the wand is unloading.... The firmware is uploaded from the Wand to the DAC. When you power cycle the DAC, it requires that you upload the firmware to it again. If you update the firmware package to the one above, try "sudo mytekusb2-firmware-loader.sh", instead of manually rmmod/modprobe/aplay. As to your second point, "won't play anything over 44.1 natively".... Once you have the DAC initialised, firmware loaded.... What does "cat /proc/asound/USB2/stream0" tell you? What rates does the hardware directly support? ------------------------------------------------------------------------ JackOfAll's Profile: http://forums.slimdevices.com/member.php?userid=3069 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
