JackOfAll wrote:
> Great!
Well... I'm afraid it's not working for me :(.
At first power up after loading R4 to the card, I was unable to connect
to my wifi using jivelite. The SSID is displayed in the list along with
all the other networks of the building, but when I select it, it spends
like one minute trying to connect with no luck. I then connected the
wandboard to my router using a cable (The reason why I'm using the wifi
is that the router is in the opposite corner, so I have to throw the
wire all over the room), accessed the web gui without problem,
configured the wifi parameters, reboot, disconnect the cable, and
everything was fine. I spent like 4-5 hours playing music through the
wifi, then I just restarted the wandboard, and I was unable to get the
wireless connection to work again.
This is how wpa_supplicant.log looks like:
Code:
--------------------
Successfully initialized wpa_supplicant
dbus: wpas_dbus_bss_signal_prop_changed: Unknown Property value 7
dbus: wpas_dbus_bss_signal_prop_changed: Unknown Property value 7
dbus: wpas_dbus_bss_signal_prop_changed: Unknown Property value 7
wlan0: Failed to initiate AP scan
wlan0: Trying to associate with 6a:96:bf:6f:ff:10 (SSID='Sicorax' freq=2462
MHz)
wlan0: Association request to the driver failed
wlan0: Associated with 6a:96:bf:6f:ff:10
wlan0: WPA: Key negotiation completed with 6a:96:bf:6f:ff:10 [PTK=CCMP
GTK=CCMP]
wlan0: CTRL-EVENT-CONNECTED - Connection to 6a:96:bf:6f:ff:10 completed [id=0
id_str=]
dbus: wpas_dbus_bss_signal_prop_changed: Unknown Property value 7
wlan0: CTRL-EVENT-DISCONNECTED bssid=6a:96:bf:6f:ff:10 reason=3
locally_generated=1
wlan0: Failed to initiate AP scan
wlan0: Trying to associate with 6a:96:bf:6f:ff:10 (SSID='Sicorax' freq=2462
MHz)
wlan0: Association request to the driver failed
wlan0: Authentication with 6a:96:bf:6f:ff:10 timed out.
wlan0: CTRL-EVENT-DISCONNECTED bssid=6a:96:bf:6f:ff:10 reason=3
locally_generated=1
wlan0: Failed to initiate AP scan
wlan0: Failed to initiate AP scan
wlan0: Failed to initiate AP scan
--------------------
And after several Failed to initiate AP sacn messages:
Code:
--------------------
wlan0: Failed to initiate AP scan
wlan0: Failed to initiate AP scan
Successfully initialized wpa_supplicant
dbus: wpas_dbus_bss_signal_prop_changed: Unknown Property value 7
dbus: wpas_dbus_bss_signal_prop_changed: Unknown Property value 7
wlan0: Trying to associate with 6a:96:bf:6f:ff:10 (SSID='Sicorax' freq=2462
MHz)
wlan0: Association request to the driver failed
wlan0: Associated with 6a:96:bf:6f:ff:10
wlan0: WPA: Key negotiation completed with 6a:96:bf:6f:ff:10 [PTK=CCMP
GTK=CCMP]
wlan0: CTRL-EVENT-CONNECTED - Connection to 6a:96:bf:6f:ff:10 completed [id=0
id_str=]
dbus: wpas_dbus_bss_signal_prop_changed: Unknown Property value 7
dbus: wpas_dbus_bss_signal_prop_changed: Unknown Property value 7
dbus: wpas_dbus_bss_signal_prop_changed: Unknown Property value 7
dbus: wpas_dbus_bss_signal_prop_changed: Unknown Property value 7
dbus: wpas_dbus_bss_signal_prop_changed: Unknown Property value 7
--------------------
And then keeps on with a lot of unknown property value 7 messages.
I've tried with three different routers with same results, sometimes it
connects, but it doesn't last long. Anyway, it doesn't bother me, since
the wireless connection is something just temporary (besides I can hear
my tube amp next to the wandboard picking noise when using wifi).
By the way, Reset button on the wireless interface page doesn't work for
me, and the only visualization I can choose is ART_AND_TEXT (-v option
is checked in the web gui).
Many thanks for your help!!! :D
------------------------------------------------------------------------
Alcaudon's Profile: http://forums.slimdevices.com/member.php?userid=59446
View this thread: http://forums.slimdevices.com/showthread.php?t=99395
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
