Reeshar wrote: > Strange. I've just tried this with a UCA202 and squeezelite "crashes" at > boot-up ie, it isn't running when I log into the RPi. If I try and set > it up by entering the command manually, LMS doesn't see the device. In > fact, something appears to crash on the RPi at the system level because > I have to reboot using sysdefault to get things back to normal...
OK, got to the bottom of this. Two things: 1) I was running SqueezeLite 1.4 whereas the latest release is 1.5. A simple update fixed that. 2) I still had Alsa ( -a xxx:x ) settings in place which it seems conflict with the -o hw:CARD command. SqueezeLite v.1.5 traps this and brings up the help menu which is when I realised the Alsa settings conflicted. So SqueezeLite is now working OK with -o hw:CARD. Unfortunately it makes absolutely no difference to the clicks when using the UCA202 which I think are the consequence of noise on the USB power/signal lines and that the UCA202 probably has very limited noise filtering. If I get the chance, I will try a USB isolator with the UCA202 to see whether it makes any difference. I've ordered a low-cost one from China but it may not arrive in time before I have to return the UCA202 to Amazon (within 30 days of purchase). The isolator has a built-in DC-to-DC converter which is supposed to reduce noise transfer, but we'll see! Richard ------------------------------------------------------------------------ Reeshar's Profile: http://forums.slimdevices.com/member.php?userid=35996 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
