JackOfAll wrote: > This thread is a continuation of the 'Community Squeeze OS F18 Release > 3' > (http://forums.slimdevices.com/showthread.php?98544-Community-Squeeze-OS-R3) > thread, which was a continuation of the 'Plastic Box Which Plays Noises' > (http://forums.slimdevices.com/showthread.php?98190-Plastic-Box-Which-Plays-Noises) > thread. > > CSOS-WANDBOARD-DUAL-F19-R1-20130811-1.IMG.7Z / > CSOS-WANDBOARD-QUAD-F19-R1-20130811-1.IMG.7Z > > For the Dual-Lite CPU Wandboard, > 'CSOS-Wandboard-Dual-F19-R1-20130811-1.img.7z' > (http://www.communitysqueeze.org/images/wandboard/CSOS/F19-R1/CSOS-Wandboard-Dual-F19-R1-20130811-1.img.7z) > ('CHECKSUM' > (http://www.communitysqueeze.org/images/wandboard/CSOS/F19-R1/CSOS-Wandboard-Dual-F19-R1-20130811-1.img.7z-CHECKSUM)) > (739MB) > > For the Quad CPU Wandboard, > 'CSOS-Wandboard-Quad-F19-R1-20130811-1.img.7z' > (http://www.communitysqueeze.org/images/wandboard/CSOS/F19-R1/CSOS-Wandboard-Quad-F19-R1-20130811-1.img.7z) > ('CHECKSUM' > (http://www.communitysqueeze.org/images/wandboard/CSOS/F19-R1/CSOS-Wandboard-Quad-F19-R1-20130811-1.img.7z-CHECKSUM)) > (739MB) > > The image, (dual or quad depending on the hardware you have purchased), > should be downloaded, decompressed, and written to a 8GB, (or greater > capacity), SDCARD either using the dd command from a Linux machine or > using 'win32diskimager' > (http://sourceforge.net/projects/win32diskimager/) from Windows. (NB. > Windows users please refer to the 'Wandboard Quick Start Guide' > (http://www.communitysqueeze.org/quick_start_guide.jsp).) > > The F19-R1 image is based on the Fedora 19 ARM release, with a Wandboard > specific 3.0.35 kernel, (including module support for mytek and hiface > USB DACs), and 2013.07 uboot. > > For first time users: Download the compressed image. Extract it from the > 7-Zip archive. Write it, (using dd or equivalent), to a >= 8GB sdcard. > Plug the sdcard into the slot on the Wandboard CPU board. (Important, > that you plug it into the sdcard slot on the CPU board. It won't boot > from the 2nd sdcard slot on the carrier board!) Plug in an ethernet > cable and apply power to the device. Wait 30 seconds. Log into your > router, which has hopefully allocated an IP Address to the Wandboard > ethernet > nterface from its pool of dhcp addresses, (the device should have sent a > clientId of 'Wandboard' to your router when it requested an address, > making it easy to find the allocated IP, if your router shows that > info), and use that IP Address to access the CSOS Web-GUI running on the > device, http://wandboard_ip_address:8080/. From the Web-GUI you can > configure the wi-fi interface, (set network name / pre-shared key), if > you wish to use a wireless connection, or re-configure the > \Squeezelite Player to use a different audio output device. (The default > is to use the sgtl5000 line-out.)
Hi I have a Synology DS710+ NAS. There is a LMS factory installed on it. As the Logitech stopped to developed the LMS it has the last ver. 7.7 intalled. I`d like to install the 7.8 ver of LMS but I do not know which platform to choose and how to do it. I read on the synology forum that DS710+ has Intel Atom D410 1.67GHz x86 proc. but not any information about the Linux ver. thank you for any advice. regards ------------------------------------------------------------------------ andrzejDAC's Profile: http://forums.slimdevices.com/member.php?userid=62414 View this thread: http://forums.slimdevices.com/showthread.php?t=99395 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
