sbp wrote: > Hi All Please try the new > *piCorePlayer1.16. > > *Get it from here: > *https://sites.google.com/site/picoreplayer/home/news* > > I'm happy to announce that this will be the last time you will have to > burn piCorePlayer to your SD-card, as in the future you can update your > system without needing access to your raspberry: > > > *-In-situ -Update* is now possible for future updates. > > > > > - From the main web page you can now check for newer versions of > piCorePlayer and update without having access to your piCorePlayer. > So no need for burning SD-cards in the future. - I have made it possible to use this in-situ mechanism for using > two older versions of piCorePlayer the 1.15b and 1.15e (now called > piCorePlayer1.15bi and piCorePlayer1.15ei). > > > > > > OTHER CHANGES: > > > > > - Kernel updated to 3.14.4 and firmware updated to latest available - HDMI issues are now hopefully fixed - Will try to establish wifi connection several times at startup > before continuing without wifi connection. > > > > > > So those of you using HDMI - please test if it is working again. So > hopefully no noise from the right channel any more, and if we are > lucky also 192khz via HDMI. But please test and report. > > For now the in situ update will allow you to change between > piCorePlayer version 1.15b 1.15e and 1.16. But all newer piCorePlayer > versions can be updated like this. > > As always please report your findings. > > Just for info I have been contacted by a commercial company that > wanted to use piCorePlayer for their system - but I declined their > offer. This is only a hobby project and it is prohibited to use > piCorePlayer in any commercial product. > > /Steen
Hello Steen, downloaded the new version 1.16 and tried with HDMI connection to my Marantz SR7007 receiver. Unfortunately I am not fully happy (like I was with 1.15b). Here are my results of testing: _no problems with strange noise via HDMI _DTS 5.1 is recognized properly on my Marantz _FLAC 24/96 => shown with 48 KHz instead of 96 KHz _FLAC 24/192 => shown with 48 KHz instead of 96 KHz _FLAC 16/44,1 => shown with 48 KHz instead of 44,1 KHz As mentioned - the HDMI output on version 1.15b was perfect with all formats above - hopefully you find the problem soon. THX Glenmorangie ------------------------------------------------------------------------ Glenmorangie_2002's Profile: http://forums.slimdevices.com/member.php?userid=62794 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
