Triode wrote:
> Is this only for hdmi output. If you restart squeezelite do you get the
> same again? What errors are in dmesg?
It seems to work OK on either the SPDIF and the Line Out. Can't verify
if there's any sound though, The SPDIF is still wired wrongly, haven't
got the soldering skills to fix it, and I don't have any headphones with
a 3,5mm jack ...
Code:
--------------------
login as: root
[email protected]'s password:
Last login: Sat Nov 29 18:49:28 2014
[root@wandboard ~]# dmesg
...
[ 8.850348] usb 1-1: new low-speed USB device number 2 using ci_hdrc
[ 9.027602] input: HOLTEK Wireless USB Device as
/devices/soc0/soc.1/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1:1.0/input/input0
[ 9.046878] hid-generic 0003:04D9:A01C.0001: input,hidraw0: USB HID v1.10
Keyboard [HOLTEK Wireless USB Device] on usb-ci_hdrc.1-1/input0
[ 9.086917] input: HOLTEK Wireless USB Device as
/devices/soc0/soc.1/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1:1.1/input/input1
[ 9.109875] hid-generic 0003:04D9:A01C.0002: input,hidraw1: USB HID v1.10
Mouse [HOLTEK Wireless USB Device] on usb-ci_hdrc.1-1/input1
[ 9.300790] ov5640_read_reg:write reg error:reg=300a
[ 9.304600] camera ov5640_mipi is not found
[ 9.321081] brcmfmac: F1 signature read @0x18000000=0x9934329
[ 9.324282] brcmfmac: brcmf_sdio_chip_drivestrengthinit: No SDIO Drive
strength init done for chip 4329 rev 3 pmurev 6
[ 9.652524] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Sep
2 2011 14:48:19 version 4.220.48
[ 9.698783] brcmfmac: brcmf_fil_cmd_data: Failed err=-23
[ 9.702886] brcmfmac: brcmf_fws_init: failed to set bdcv2 tlv signaling
[ 9.737232] usbcore: registered new interface driver brcmfmac
[ 10.387432] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Generic
PHY] (mii_bus:phy_addr=2188000.ethernet:01, irq=-1)
[ 10.422566] unable to find transceiver of type USB3 PHY
[ 10.425858] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.431155] dwc3 dwc3.0.auto: no usb3 phy configured
[ 10.465339] platform dwc3.0.auto: Driver dwc3 requests probe deferral
[ 10.474741] ERROR: v4l2 capture: slave not found!
[ 10.535611] evbug: Connected device: input0 (HOLTEK Wireless USB Device at
usb-ci_hdrc.1-1/input0)
[ 10.535629] evbug: Connected device: input1 (HOLTEK Wireless USB Device at
usb-ci_hdrc.1-1/input1)
[ 13.380587] libphy: 2188000.ethernet:01 - Link is Up - 100/Full
[ 13.385242] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.232170] imx-hdmi-audio imx-hdmi-audio: HDMI Video is not ready!
[ 15.237162] imx-hdmi-audio imx-hdmi-audio: ASoC: can't open platform
imx-hdmi-audio: -22
[ 172.186890] imx-hdmi-audio imx-hdmi-audio: HDMI Video is not ready!
[ 172.192065] imx-hdmi-audio imx-hdmi-audio: ASoC: can't open platform
imx-hdmi-audio: -22
[ 380.378402] imx-hdmi-audio imx-hdmi-audio: HDMI Video is not ready!
[ 380.383443] imx-hdmi-audio imx-hdmi-audio: ASoC: can't open platform
imx-hdmi-audio: -22
--------------------
Main System: Touch; Marantz SR-5004; TMA Premium 905; TMA Premium 901;
BK Monolith+ FF; HDI Dune Smart D1; Pioneer PDP-LX5090H
iPad 32GB Wifi + Squeezepad (local playback activated)
Acer Iconia Tab A700 + Squeezeplayer
Wandboard Duallite + CSOS, integrated LMS activated
------------------------------------------------------------------------
bakker_be's Profile: http://forums.slimdevices.com/member.php?userid=30369
View this thread: http://forums.slimdevices.com/showthread.php?t=101624
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
