HifiBerryDigi+ wrote:
> I downloaded both v1.19 for the arm6 and for the arm7 (new RPi2).
>
> My RPi B+'s don't boot (red LED on, green LED blinking) when I try to
> use the v1.19 for the RPi2 - (this is not really a surprise).
>
> My three newer RPi B+'s boot with v1.19 for the "older" RPIs, activate
> their ethernet connection, but in the web interface I only get the
> choice of analog/HDMI/USB for audio output and my HifiBerryDigi+ board
> (although installed) does not appear to be selectable ?
>
> My previous RPi B+ and HifiBerryDigi-board worked with v1.18b, but the
> my three newer RPi B+'s boot with v1.18b but do not activate the
> ethernet connection - and so cannot be configured or used at all.
>
> Any help would be most welcome...
Hi HifiBerryDigi+
I'm sorry for the problems you experience with piCorePlayer.
In version 1.19 we added some code to check which raspberry board it is
running on, and then only display the valid output options.
So somehow our detection system is giving piCorePlayer the impression
that it is running on one of the older RPi boards.
If you can SHH into piCorePlayer using putty, winscp or similar please
execute the following command:
Code:
--------------------
sudo cat /proc/cpuinfo
--------------------
And then copy-paste the output here - then we can fix it for the next
version.
Steen
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://sites.google.com/site/picoreplayer/home
*Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc=GB¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted)
if you like the piCorePlayer*
------------------------------------------------------------------------
sbp's Profile: http://forums.slimdevices.com/member.php?userid=37237
View this thread: http://forums.slimdevices.com/showthread.php?t=97803
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
