Greg Erskine wrote: > hi stereoptic, > > Just wondering, when you swap the "Audio out" between HDMI and anything > else, you must do a reboot for the settings to take effect. This is > because some of the settings for HDMI are in the config.txt in the boot > partition and is only read during the boot process. Also, on the > Raspberry Pi the sound is directed to the HDMI OR the headphone port and > again this is determined during the boot process. I will add some more > help information to the "audio out", it looks like I may have deleted it > sometime. > > Try playing with Tweaks > Audio tweaks > FIQ-Split acceleration. (Reboot > required) > > You can also try increasing/decreasing your buffer size. > > EDIT: I typed this reply earlier but forgot to post it. I notice some > other responses in the meantime. oops! > > regards > Greg
Thanks Greg. I probably did not make myself clear, but I have rebooted each time I changed the audio output. I have even unplugged and the replugged the pi. One thing that I changed before I read your post was that I changed the streaming from 'Direct' to 'proxied'. That might have fixed it. So far, so good. But I have said that before. Which buffer setting are you referring to? The option below the ALSA setting on the picore player webppage? What is a good size? Or do you mean the variable in the ALSA setting? Right now that is set at ::32:0, which as Steen posted is the default for HDMI. Thanks for the reply! ------------------------------------------------------------------------ stereoptic's Profile: http://forums.slimdevices.com/member.php?userid=53162 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
