Hi guys ,
I need some help to get my USB hub+nic working on a PizeroW running
pcp3.5.0 regular.
The pi is running and playing OK and has the internal WiFi nic running
fine through .
The USB part seems OK and dmesg reports :
Code:
--------------------
[ 1.542238] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.542394] Indeed it is in host mode hprt0 = 00001101
[ 1.822734] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
[ 1.822752] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 1.822759] usb 1-1: Product: USB 2.0 Hub
[ 1.823557] hub 1-1:1.0: USB hub found
[ 1.823684] hub 1-1:1.0: 4 ports detected
[ 2.142225] usb 1-1.2: new full-speed USB device number 3 using dwc_otg
[ 2.274804] usb 1-1.2: New USB device found, idVendor=0fe6, idProduct=9700
[ 2.274824] usb 1-1.2: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[ 2.274832] usb 1-1.2: Product: USB 2.0 10/100M Ethernet Adaptor
--------------------
and lsusb shows:
Code:
--------------------
Bus 001 Device 001: ID 1d6b:0002
Bus 001 Device 002: ID 1a40:0101
Bus 001 Device 003: ID 0fe6:9700
--------------------
to get the drivers loaded I verified net-usb-4.14.26-pcpCore.tcz is
available on the system.
however the assumed r8152.ko does not load, nor any other and in the dir
/usr/local/lib/modules/4.14.26-pcpCore/kernel/net/
I cant find a 'usb' subdir that could/should hold the .ko files.
What am I missing here? Or did I stumble on a missing part in the
repository ? Could it be the ARMv6 set I need for this zero v.s. the
more used ARMv7 set ? ( unfortunately I can't test this device on a
different Pi, no usb adapter )
Any pointers are appreciated.
Regards M-H
------------------------------------------------------------------------
M-H's Profile: http://forums.slimdevices.com/member.php?userid=66156
View this thread: http://forums.slimdevices.com/showthread.php?t=108852
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
