d6jg wrote: > What is your verdict kidstypike ?
It arrived! Couple of points, I'm not sure if you're not mistaken, but the endplate with the cutout for the SD card is acrylic and is at least twice the thickness of the other plate which is steel. The manufacturers should really think about pre-tapping the holes for the endplate screws, it's extremely difficult to cut a thread with the supplied machine screws. I used the four screws that would eventually be used for the back plate (and thus out of sight) to pre-tap all the holes, using a T10 bit in a cordless drill on low speed. Even this wasn't easy! Other than that everything fits and looks good - not a wire in sight. I stuck four small rubber self-adhesive feet on the base. It does it's job, and as a bonus it sounds fantastic. ;) Thanks. 27014 +-------------------------------------------------------------------+ |Filename: Pi-Box Pro.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=27014| +-------------------------------------------------------------------+ *Study/Server - LMS 7.9.2 -* Pi3B+/pCP 4.1.0/pi screen/HiFiBerry DAC+/jivelite, 25K library and playlists on WDMyCloud, LMS cache on a USB stick (formatted ntfs). *Lounge* - Pi2/pCP 4.1.0 > HiFiBerry DIGI+ > AudioEngine DAC1 > AVI DM5 *Dining Room* - Squeezebox Boom *Garage* - Pi3B/Pi screen/HiFiBerry DAC+/pCP 4.1.0 > Edifier R980T *In car* - RPi3B/pCP in AP mode > HiFiBerry DAC+ > car's audio (files on a 2TB USB drive) *Spares* - 2xTouch, 1xSB3, 1xRadio, 4xRPi ------------------------------------------------------------------------ kidstypike's Profile: http://forums.slimdevices.com/member.php?userid=10436 View this thread: http://forums.slimdevices.com/showthread.php?t=110346 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
