Greg Erskine wrote: > The RPi0 is a single core CPU while the RPi3B+ is a quad core CPU. > > Initially the SD card will work with both but when you start loading > extra extensions, depending on what particular extensions are selected, > piCorePlayer only loads extensions for the particular CPU. So somewhere > along the line, it is "likely" that the SD card will stop working when > you swap it around. > > AirFiero, if things seem complicated something is wrong. > > I believe setting up a RPi3B+ on ethernet requires no setup. Plug in > ethernet cable, insert SD card and apply power. > > For the RPi0, wifi is usually used, so an extra step is required. You > need to put a wpa_supplicant.conf on the SD card's boot DOS partition > using another computer. If you have a keyboard and monitor attached you > can use the CLI "setup". > > https://www.picoreplayer.org/how_to_setup_wifi_on_pcp_without_ethernet.shtml
Ok Ill set that up, thanks. ------------------------------------------------------------------------ AirFiero's Profile: http://forums.slimdevices.com/member.php?userid=69090 View this thread: http://forums.slimdevices.com/showthread.php?t=106833
_______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
