pputzer wrote: > > > > Code: -------------------- > > Test Complete. Summary Results: > [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams > [ 5] 0.00-21.21 sec 759 MBytes 300 Mbits/sec 0.000 ms 0/555748 (0%) sender > [ 5] 0.00-21.00 sec 148 MBytes 59.2 Mbits/sec 0.174 ms 436688/544068 (80%) receiver > CPU Utilization: local/receiver 6.0% (0.7%u/5.3%s), remote/sender 0.8% (0.1%u/0.7%s) -------------------- > > > > *Edit: Doh! I forgot to change the WIFI country code. No wonder there > were issues :( *
Glad you figured it out.....I just did testing and it was spot on (I noticed your note later) This serves as a notice to those using wifi. If manually configuring, we do not force you to set a country code, but you really need to set it correctly. Also, it is noted in the OP, but iperf diagnostics is included in the web pages (Diagnostics -> Network), you will need a second device to run the iperf test with, preferably iperf3 running on your LMS server. Here is some example output. Code: -------------------- [ WARN ] Squeezelite is running, results might be affected [ WARN ] Goto Main menu and stop squeezelite [ INFO ] Iperf running in UDP Mode. [ INFO ] Iperf running in Receive Mode. [ INFO ] Ommiting 1st second of transmission, likely due to server being faster than rpi. [ INFO ] Iperf will run for 20 seconds, then output will show....... iperf 3.6 Linux piHifiADC 4.19.40-rt19-pcpAudioCore_v7 #1 SMP Sat May 11 13:21:57 EDT 2019 armv7l Control connection MSS 1448 Setting UDP block size to 1448 Time: Tue, 11 Jun 2019 00:25:39 GMT Connecting to host 192.168.0.141, port 5201 Reverse mode, remote host 192.168.0.141 is sending Cookie: 3czl6ymyso5fn6lp2lrkdhmax3pj7fbgnxin [ 5] local 192.168.0.35 port 56941 connected to 192.168.0.141 port 5201 Starting Test: protocol: UDP, 1 streams, 1448 byte blocks, omitting 1 seconds, 21 second test, tos 0 [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-1.00 sec 15.8 MBytes 132 Mbits/sec 0.086 ms 6905/18313 (38%) (omitted) [ 5] 0.00-1.00 sec 14.7 MBytes 123 Mbits/sec 0.124 ms 14884/25526 (58%) [ 5] 1.00-2.00 sec 14.8 MBytes 124 Mbits/sec 0.112 ms 15622/26352 (59%) [ 5] 2.00-3.00 sec 15.7 MBytes 132 Mbits/sec 0.147 ms 15318/26719 (57%) [ 5] 3.00-4.00 sec 16.1 MBytes 135 Mbits/sec 0.077 ms 14270/25896 (55%) [ 5] 4.00-5.00 sec 16.1 MBytes 135 Mbits/sec 0.125 ms 14260/25901 (55%) [ 5] 5.00-6.00 sec 16.1 MBytes 135 Mbits/sec 0.069 ms 13997/25624 (55%) [ 5] 6.00-7.00 sec 16.1 MBytes 135 Mbits/sec 0.107 ms 14140/25798 (55%) [ 5] 7.00-8.00 sec 16.1 MBytes 135 Mbits/sec 0.087 ms 14360/26017 (55%) [ 5] 8.00-9.00 sec 16.1 MBytes 135 Mbits/sec 0.162 ms 14233/25871 (55%) [ 5] 9.00-10.00 sec 16.1 MBytes 135 Mbits/sec 0.082 ms 14060/25709 (55%) [ 5] 10.00-11.00 sec 16.1 MBytes 135 Mbits/sec 0.196 ms 14528/26179 (55%) [ 5] 11.00-12.00 sec 16.1 MBytes 135 Mbits/sec 0.092 ms 14069/25694 (55%) [ 5] 12.00-13.00 sec 16.1 MBytes 135 Mbits/sec 0.191 ms 14400/26040 (55%) [ 5] 13.00-14.00 sec 16.1 MBytes 135 Mbits/sec 0.103 ms 14147/25810 (55%) [ 5] 14.00-15.00 sec 16.1 MBytes 135 Mbits/sec 0.071 ms 14093/25749 (55%) [ 5] 15.00-16.00 sec 16.1 MBytes 135 Mbits/sec 0.121 ms 14337/25982 (55%) [ 5] 16.00-17.00 sec 16.1 MBytes 135 Mbits/sec 0.116 ms 14265/25894 (55%) [ 5] 17.00-18.00 sec 15.8 MBytes 133 Mbits/sec 0.178 ms 14169/25625 (55%) [ 5] 18.00-19.00 sec 16.1 MBytes 135 Mbits/sec 0.049 ms 14451/26088 (55%) [ 5] 19.00-20.00 sec 16.1 MBytes 135 Mbits/sec 0.102 ms 14735/26361 (56%) [ 5] 20.00-21.00 sec 16.0 MBytes 134 Mbits/sec 0.087 ms 14036/25634 (55%) - - - - - - - - - - - - - - - - - - - - - - - - - Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-21.12 sec 755 MBytes 300 Mbits/sec 0.000 ms 0/554589 (0%) sender [ 5] 0.00-21.00 sec 334 MBytes 134 Mbits/sec 0.087 ms 302374/544469 (56%) receiver CPU Utilization: local/receiver 12.4% (1.2%u/11.2%s), remote/sender 18.8% (2.2%u/16.6%s) iperf Done. -------------------- piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc=GB¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer ------------------------------------------------------------------------ paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=110642 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix