OKE Chill, here is the Dutch input:
# SLT: QVGA refers to the "quarter VGA" resolution of the display
EN QVGA 240x240 Square Skin
# NL QVGA Landscape-skin
NL QVGA 240-Vierkant-skin
LABEL_ADJUST_BRIGHTNESS_GENERIC
# EN Backlight Brightness:
EN Brightness:
# NL Helderheid:
NL Helderheid:
LABEL_ADJUST_BRIGHTNESS_WHEN_OFF_GENERIC
# EN Backlight Brightness when Powered Off:
EN 'Off' Brightness:
# NL Helderheid wanneer de speler uit staat:
NL Helderheid bij 'uit':
HELP_TEXT_ADJUST_BRIGHTNESS_GENERIC
# EN \nAdjusting backlight brightness works only on PCB v1.1
displays.
Older revisions toggle between backlight off (0-127) and backlight on
(128-255).\n\nPress (volume) up\down to change the brightness level or
press the 0..9 keys to set the level to a percentage of the maximum
value (0 = 100%, 1 = 10%, 2 = 20%, ...). Press home to exit.
EN \nPress up or down to change the brightness level or press the
0..9
keys to set the level in 10% increments.\nPress HOME or ESC to exit.
# NL \nDruk op (volume) hoger/lager om de helderheid aan te passen of
gebruik de 0..9 toetsen om percentuele aanpassingen te maken (0 = 100%,
1 = 10%, 2 = 20%, ...). Druk op home om terug te keren.
NL \nGebruik [volume] voor helderheid aanpassing. Gebruik toetsen
0..9
voor ( 1 = 10%, 2 = 20%, ..., 0 = 100%). [home]of[esc] voor einde.
HELP_TEXT_ADJUST_BRIGHTNESS_WHEN_OFF_GENERIC
# EN \nAdjust backlight brightness when player is powered off (no
visual
feedback!). \n\nPress (volume) up/down to change the brightness level or
press the 0..9 keys to set the level to a percentage of the maximum
value (0 = 100%, 1 = 10%, 2 = 20%, ...). Press home to exit.
EN \nPress up or down to change (no visual feedback!)\nor press
0..9
keys to set the level in 10% increments.\nPress HOME or ESC to exit.
# NL \nAanpassen van de helderheid wanneer de speler uit staat (geen
visuele terugkoppeling!). \n\nDruk op (volume) hoger/lager om de
helderheid aan te passen of gebruik de 0..9 toetsen om percentuele
aanpassingen te maken (0 = 100%, 1 = 10%, 2 = 20%, ...). Druk op home om
terug te keren.
NL \nGebruik [volume] voor helderheid aanpassing. Gebruik toetsen
0..9
voor ( 1 = 10%, 2 = 20%, ..., 0 = 100%). [home]of[esc] voor einde.
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other tests...
------------------------------------------------------------------------
M-H's Profile: http://forums.slimdevices.com/member.php?userid=66156
View this thread: http://forums.slimdevices.com/showthread.php?t=111502
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
