themetman wrote: > OK, @ralphy still no good, so did fresh install of version 6.1.0, > configured the IR as default: > > I have not updated the system yet. > > I am using the Basic Player, not the server or Beta and I do not have > LMS active on this player. > > Then ssh into the system > > > Code: -------------------- > > grep ir config.txt > dtoverlay=gpio-ir,gpio_pin=25 > -------------------- > > > > I have checked, I do have the correct Pin Layout, so issued command: > > Code: -------------------- > > > irw -------------------- > > > > Nothing. > > Dug out my little BitScope, and have a signal as expected from the IR > receiver when Remote is activated. > I have checked the Pinout for the HiFiBerry DAC/AMP and pin 25 is not > used. > > I have tried it on another identical machine, nothing. > I have checcked the continuity from the pins under the Pi Board to the > pins of the IR Receiver which is fine, so not a cable problem either. > > What next?
What pin do you have the IR connected? GPIO 25 is 'pin 22' (https://github.com/ralph-irving/tcz-lirc/blob/master/Raspberry-Pi-GPIO-Layout-Revision-2.png). Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=LL5P6365KQEXN&lc=CA&item_name=Squeezebox%20client%20builds¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ------------------------------------------------------------------------ ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=108410 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
