Man in a van wrote: > There are usb Y splitter cables which have seperate data and power > connectors. > > My suggestion is to try another OS, just to prove that it works > properly > > Raspberry Pi OS Lite and install squeezelite would be my go to, then a > version of pCP <7.0.0 > > Max2play can install squeezelite without a license. > > Have you even made a fresh image of pCP v7.0.0 ? > > ronnie > > Where in the world are you ?
Tried piCore 6.1>7.0 - no effect, also tried volumio - the same behavior. slartibartfast wrote: > I wonder if it would work with a delay between the commands. You could > SSH into the Pi and issue the commands in the terminal. The gap between > commands should be enough to simulate a physical disconnection and > reconnection. > > Sent from my Pixel 3a using Tapatalk Delay didn't help. Remains the same. coyrls wrote: > There is a possibility I think that there is some sort of timing issue > going on, as the DAC doesn't function at boot but will function if you > replug it. The odd thing is that the DAC is recognised but doesn't > function. Anyway, as an experiment, you could slow down the boot > process by setting the "Wait for USB" parameter using the "Beta" tab > "Main Page" -> "Extras" -> "Bootcodes" -> "waitusb=". Try setting it to > something like 30 seconds. There is no USB device to wait for (your DAC > is recognised) but it will slow the boot process by the time entered, > which *may* allow the DAC to get to a functioning state before > Squeezelite is started. Tried 30, 50, 100. Unfortunately, no change. I guess it could be some hardware incompatibility. Thanks a lot everyone for your help! ------------------------------------------------------------------------ bigq's Profile: http://forums.slimdevices.com/member.php?userid=71375 View this thread: http://forums.slimdevices.com/showthread.php?t=113895 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
